Everbuild 2-Part High-Performance Wood Filler - Light Stainable - 500G

Once mixed, the filler has a working time of approximately 30 minutes, after which it begins to set hard.

While durable and strong, it is primarily designed for cosmetic repairs and filling defects. For structural load-bearing repairs, consult specific engineering guidelines.

The filler sets hard in about 30 minutes, but allow a few hours for full curing before heavy sanding, drilling, or painting to ensure optimal durability.

Yes, it is completely weatherproof and suitable for both interior and exterior applications.

Yes, once dry and fully cured, it can be drilled, carved, planed, and sanded.

This is the Light Stainable variant. Other colors like Medium Stainable, Pine, Oak, Redwood, and Mahogany are also available in different sizes.

Once mixed, the filler will begin to harden rapidly. It is best to mix only the amount needed for immediate application.

Ensure the hardener was mixed in the correct ratio and thoroughly combined with the filler. Check storage conditions; extreme cold can affect setting.

You may have mixed too much hardener or the ambient temperature is very high. Work faster or mix smaller batches in the future.

This can happen with very deep repairs. Apply in thinner layers, allowing each to cure partially before adding the next, or use a larger batch to account for slight shrinkage.

The surface may not have been properly prepared. Ensure it was clean, dry, and free from dust, grease, or old finishes. Lightly abrading the surface can improve grip.