Everbuild 2-Part High Performance Wood Filler - White - 1.4kg

The filler can typically be sanded, stained, painted, varnished, or dyed approximately 30 minutes after application, depending on ambient temperature and humidity.

While it's highly durable, it is primarily recommended for interior wood applications. For exterior use, ensure it is thoroughly sealed with a suitable exterior-grade finish to protect it from prolonged moisture.

Stored correctly in original, sealed containers in a cool, dry place, the filler should maintain its efficacy for an extended period. Always refer to the product packaging for specific batch information and recommended storage.

Yes, once fully cured, the filler is strong enough to be drilled, nailed, planed, or carved, behaving much like natural wood.

Tools and application surfaces should be cleaned with water immediately after use, before the filler has a chance to harden.

The cured filler can withstand temperatures ranging from -20°C to +100°C.

Yes, the filler is designed to be easily sanded smooth once it has set, allowing for a seamless finish.

Ensure the two parts were mixed in the correct ratio (typically 2:1 or as per packaging). Check if the ambient temperature is within the recommended range for curing. Stored product may have lost efficacy if old.

This can happen in very warm conditions. Work in smaller batches or in a cooler environment. Ensure you are not mixing more than can be used within the working pot life.

This usually indicates that the filler was applied too thickly in one go. For deep repairs, apply in layers, allowing each layer to partially set before adding the next. Ensure proper mixing.

The surface may not have been properly prepared. Ensure the wood is clean, dry, and free from dust, grease, or loose paint/varnish before application.