Ronseal 10 Year Woodstain - Dark Oak - 250Ml - Satin

It provides up to 10 years of weather protection.

It can be used on various exterior wooden surfaces such as fences, sheds, and garden furniture.

No priming is usually needed if the wood is bare or previously stained. Ensure the wood is clean and sanded before applying the stain.

Apply at least two coats for optimal protection and appearance. Additional coats may be needed depending on the wood.

Clean the surface, remove any existing coatings, and sand the wood to create a smooth surface.

Clean brushes and applicators with the appropriate solvent immediately after use.

Yes, Ronseal 10 Year Woodstain can be used on decking, ensuring the wood is properly prepared before application.

Ensure the application area has good ventilation. Check the temperature and humidity levels, as these can affect drying times. Make sure the coats are thin.

Ensure the wood is properly prepared and sanded before application. Apply the stain evenly and in the direction of the wood grain.

This may be due to improper surface preparation or applying too much stain. Remove the existing finish by sanding. Apply the stain in thin, even coats.