Ronseal One Coat Shed & Fence Protector Refill Pouch 950ml - Brown

When applied correctly to a properly prepared surface, this product provides durable protection and color for up to 2 years.

No, this product is specifically formulated for rough sawn sheds and fences. It is not recommended for garden furniture or decking as it may not provide adequate durability or slip resistance for those surfaces.

Yes, Ronseal One Coat Shed & Fence Protector is designed to deliver full color and protection in just one generous coat. For very porous or new wood, a second light coat may be applied once the first is dry for enhanced protection, but it's not typically required for color.

The coverage depends on the porosity and texture of the wood. A 12L tub is designed for substantial outdoor areas, making it suitable for multiple average-sized sheds or long runs of fencing. Always refer to the product label for specific coverage rates if available, or calculate based on your project size.

Drying times can vary significantly based on temperature, humidity, and the porosity of the wood. Always refer to the specific drying times indicated on the product label. It's best to apply on a dry day with no rain forecast.

For best results, surfaces should be clean, dry, and free from any loose or flaking material. If applying over existing paint or stain, ensure it is sound and well-adhered. It performs best on bare or previously treated rough sawn wood.

As this is a water-based product, brushes and sprayers can typically be cleaned with warm soapy water immediately after use. Rinse thoroughly until all paint residue is removed.

Ensure the product is thoroughly stirred before and periodically during application. Apply an even, generous coat, avoiding thin spots or excessive build-up in one area.

Verify that the surface was clean, dry, and free from loose material before application. Ensure one generous coat was applied as recommended. Extreme weather exposure can sometimes reduce longevity; consider reapplying after 18-24 months if performance diminishes.

Check ambient temperature and humidity. This product requires suitable drying conditions; avoid application in cold, damp weather or if rain is forecast. Ensure good ventilation around the treated area.

This usually indicates improper surface preparation. Ensure all loose, flaking, or old treatments were removed and the surface was clean and dry before applying. The protector needs a sound surface to adhere effectively.

Ensure your sprayer is clean and compatible with water-based treatments. Check the manufacturer's instructions for thinning if necessary (though Ronseal products are generally ready to use), and ensure the nozzle is clear and set correctly for even dispersion.