Ronseal One Coat Shed & Fence Protector - Charcoal Grey

The Ronseal One Coat Shed & Fence Protector provides durable weather protection for up to two years.

This product is specifically formulated for sheds and fences. For decking or garden furniture, it is recommended to use products designed for those specific applications to ensure optimal performance and safety.

No, a primer is not typically required. This product is designed as a 'One Coat' solution, meaning it contains everything needed for both colour and protection in a single application, provided the surface is properly prepared.

You can apply it easily with either a good quality exterior wood brush or a paint spray gun. Always stir the paint well before and during use for an even finish.

Clean all brushes and equipment with water immediately after you have finished painting. Do not allow the paint to dry on the tools.

While it provides weather resistance and forms a protective barrier, continuous protection against specific organic growths like algae or mold over the long term is not explicitly stated. Regular cleaning and reapplication will help maintain the surface.

Ensure the wood surface was completely clean, dry, and free of loose material (e.g., old paint, dirt, mould) before application. Proper surface preparation is crucial for good adhesion.

Stir the paint thoroughly before and during application to ensure pigments are evenly mixed. Apply the paint consistently and evenly, avoiding thick patches or drips. Very porous or absorbent wood might require a light second coat.

Drying time is significantly affected by environmental conditions. Ensure adequate ventilation, and check that the temperature is within the recommended range (typically above 10°C) and humidity is not too high. Apply thinner, even coats.