Crown Walls & Ceilings Matt Emulsion Paint 2.5L - Pink

This paint is suitable for interior walls and ceilings, including plaster, brick, and wallpaper. Ensure surfaces are clean, dry, and properly prepared before application.

Coverage depends on surface porosity and previous color. Generally, 2.5 litres will cover approximately 25-30 square meters with one coat. We recommend measuring your space and factoring in two coats for best results. Always refer to the coverage information on the specific product label.

Crown Walls & Ceilings Matt Emulsion Paint is quick-drying. Typically, it is touch dry in 2-4 hours and ready for a second coat in 4-6 hours. Drying times can vary depending on temperature and humidity.

Being water-based, brushes and rollers can be cleaned easily with warm, soapy water immediately after use. Rinse thoroughly and allow to dry before storing.

Yes, you can paint over existing painted walls. Ensure the surface is clean, dry, sound, and free from any flaking or loose paint. Lightly sand glossy finishes to provide a key for adhesion before painting.

Matt emulsion paints generally have limited washability compared to silk or sheen finishes. For best results, gently wipe any marks with a very lightly damp, soft cloth. Avoid scrubbing or abrasive cleaners as this can damage the matt finish.

Ensure proper surface preparation. Apply paint evenly and avoid overloading brushes or rollers. Maintain a 'wet edge' when rolling to prevent lap marks. For best results, use good quality application tools.

Thoroughly stir the paint before and during use. Ensure the surface is clean, dry, and primed, especially if painting over a dark color or porous surface. Apply sufficient paint without overspreading.

Ensure adequate ventilation in the room. Avoid applying paint in very humid or cold conditions, as this can significantly slow drying time. Do not apply coats too thickly.

This often indicates poor surface preparation. Ensure the surface was clean, dry, and free of loose material before painting. Scrape off loose paint, sand, clean, and re-prime affected areas before repainting.

Paint color can vary slightly based on lighting conditions, surface texture, and the number of coats. Always do a small test patch in an inconspicuous area to confirm the color before painting the entire room.