Osmo Natural Oil Wood Stain - Pearl Grey - 906

It's best applied to bare, clean wood. If applying over existing finishes, ensure they are completely removed or at least thoroughly scuffed and tested for compatibility. Otherwise, adhesion and performance may be compromised.

Typically, one or two thin coats are recommended. The exact number depends on the wood type and desired color depth. Always allow adequate drying time between coats.

While durable, Osmo Natural Oil Wood Stain is generally not recommended for high-contact surfaces like kitchen countertops that require heavy-duty, food-safe finishes. For countertops, specific Osmo worktop oils are usually more appropriate.

Tools should be cleaned immediately after use with white spirit or a suitable brush cleaner.

The lifespan varies greatly depending on the application (interior/exterior), exposure to elements, and traffic. For exterior use, reapplication might be needed every 1-3 years. Interior applications typically last longer.

No, the finish is designed to maintain the natural feel and texture of the wood. It penetrates the fibers rather than forming a thick film on the surface.

Yes, different shades can be mixed to create custom colors. Always test the mixture on a scrap piece of wood before applying to your project.

Ensure the stain was thoroughly stirred before and during application. Apply thin, even coats and maintain a wet edge. Ensure the wood surface was properly prepared and is uniformly absorbent.

Ensure application in a well-ventilated area with moderate temperature and humidity. Thick coats or poor ventilation can slow drying. Apply thinner coats if drying is excessively slow.

This can happen with oil-based stains. For lighter results, consider applying a thinner coat or exploring lighter color variants. Test on an inconspicuous area first.

This is normal initially as the oils cure. The finish should become fully resistant once cured. If water penetrates or leaves marks, recoating might be necessary after proper cleaning.