Osmo Natural Oil Woodstain - Red - 728
Best current price£7.53from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.53Visit shop B&Q - Natural Oil Wood Stain 728 Red Cedar5Ml
Visit shopB&Q£7.53Visit shop All Offers
7 offers from £7.53 - £92.22
View price history by clicking the chart icon.
B&Q - Natural Oil Wood Stain 728 Red Cedar125MlFree delivery in 1–3 days£17.48Visit shop →
B&Q - Natural Oil Wood Stain 728 Red Cedar750MlFree delivery in 1–3 days£30.50Visit shop →
B&Q - Natural Oil Woodstain (Satin) 728 Cedar 750MlFree delivery in 1–3 days£30.50Visit shop →
B&Q - Natural Oil Wood Stain 728 Red Cedar2.5LFree delivery in 1–3 days£92.22Visit shop →
B&Q - Natural Oil Woodstain (Matt) 728 Cedar 2.5LFree delivery in 1–3 days£92.22Visit shop →
B&Q - Natural Oil Woodstain (Satin) 728 Cedar 2.5LFree delivery in 1–3 days£92.22Visit shop →
Product Information
Full details
The Osmo Natural Oil Woodstain (Red 728) is a premium, oil-based protective finish designed for both DIY enthusiasts and professional woodworkers looking to protect and enhance exterior timber. This product excels at providing a water-repellent, weather-resistant barrier that remains breathable to prevent wood swelling and shrinkage, though users should be aware that it requires a clean, bare surface for proper adhesion.
All features
| Colour | Red |
|---|---|
| Model Part Number | 728 |
| Brand | Rackhams |
Extended Product Information
FAQs
Can I use this on indoor furniture?
This product is specifically formulated for exterior use and contains active ingredients for fungal protection that are generally not required for indoor items.
How many coats should I apply?
For new timber, two thin coats are typically recommended for full protection.
Do I need to sand the wood before reapplying?
For routine maintenance (re-coating), cleaning the surface is often sufficient provided the previous finish is in good condition.
Is this product water-based?
No, this is an oil-based finish that penetrates the wood for deeper protection.
Can I use it on pressure-treated wood?
Yes, but ensure the wood has weathered for a few weeks to allow moisture content to stabilize before application.
Troubleshooting
The stain is taking a long time to dry.
Ensure that the coats applied were thin. Thick coats trap solvents and prevent proper evaporation.
The finish looks uneven.
This is often due to uneven absorption. Ensure the wood surface is sanded uniformly and the product is stirred thoroughly before application.
The product is peeling or flaking.
This usually indicates the surface was not fully prepared or previous coatings were not removed, preventing the stain from penetrating the wood fibers.
Pros and Cons
Pros
- Excellent water and UV resistance for long-lasting protection
- Breathable finish prevents wood swelling and shrinkage
- Provides a natural look by keeping the grain visible
- Easy to maintain with simple spot repairs
- Contains preventative ingredients against algae and mildew
Cons
- Requires complete removal of previous finishes before application
- Application requires patience as multiple thin coats are needed
- Not suitable for use on surfaces already treated with thick, non-porous coatings
Setup, Compatibility & Care
To ensure the longevity of the finish, the surface must be completely clean, dry, and free from dust or existing varnish/paint. If the wood was previously painted, you must sand it back to the raw timber.
- Preparation: Clean the surface thoroughly and allow it to dry completely.
- Application: Use a high-quality soft brush or a dedicated wood stain roller to apply the product.
- Technique: Always apply in thin coats to ensure the oil penetrates the wood properly.
- Drying: Allow adequate drying time between coats to ensure the finish hardens correctly.
- Maintenance: Periodically check the surface for dirt buildup and reapply thin coats as the wood loses its water-repellent properties.