Best current price£7.53from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.53Visit shop B&Q - Natural Oil Wood Stain 727 Rosewood5Ml
Visit shop
eBay£22.50Visit shop osmo 2 in 1 NATURAL OIL WOODSTAIN - 701 Clear Matt - 750ml 0.75L
Visit shop29 offers from £7.53 - £41.94
View price history by clicking the chart icon.
The Osmo Natural Oil Wood Stain is a high-quality, water-based wood finish for DIY enthusiasts and professionals seeking to enhance and protect interior and exterior wood surfaces. Its key benefit is providing deep nourishment and durable protection with a natural look, while a potential caveat is the need for proper surface preparation for optimal results. This versatile stain penetrates wood fibers, offering resistance to water, UV rays, and abrasion, all while being environmentally friendly with low VOCs.
| Colour | Brown |
|---|---|
| Model Part Number | 706 |
| Brand | Osmo |
Yes, this stain is designed for both interior and exterior use and provides protection against water and UV rays.
Typically, one or two thin coats are recommended, depending on the desired depth of color and protection. Always follow the specific instructions on the product packaging.
Drying times can vary based on temperature and humidity, but it generally dries quickly. Allow several hours between coats and before light use.
The product is environmentally friendly with low VOCs and free from harmful chemicals, making it a suitable option for surfaces that come into contact with children, but always check specific safety certifications if required.
No, this stain is designed for bare wood. Existing varnish must be completely removed and the wood sanded before application.
Tools should be cleaned immediately after use with water or a mild soap and water solution.
Unopened containers typically have a shelf life of several years when stored in a cool, dry place. Once opened, it's best to use within a year.
Ensure the stain was applied thinly and evenly. If issues persist after drying, lightly sand the affected area and reapply a thin, uniform coat. Ensure consistent application technique.
This indicates the stain was applied too thickly or did not dry properly. Apply a small amount of mineral spirits to a clean cloth and gently wipe down the surface to remove excess. Ensure proper ventilation for drying.
The protective layer may be worn or not fully cured. Ensure adequate drying time has passed. If the finish is old, a maintenance coat may be required after cleaning and light sanding.
Ensure you are applying thinly and working with the grain. If the product is too viscous, check if it's within the recommended temperature range or consult the manufacturer's guidelines for thinning if permitted.
Application: Ensure the wood surface is clean, dry, and free from dust, grease, or old finishes. Lightly sand the surface if necessary and remove dust. Apply the stain thinly and evenly with a brush or cloth, following the direction of the wood grain. For best results, apply one or two thin coats, allowing adequate drying time between coats as per manufacturer instructions.
Compatibility: This stain is compatible with most types of bare wood, including softwoods and hardwoods. It is not recommended for direct application over existing painted or varnished surfaces without proper preparation (stripping and sanding).
Care: Clean spills immediately. For general cleaning, use a damp cloth. Avoid harsh chemical cleaners, as they can degrade the finish. For maintenance, a light recoat may be necessary every few years, depending on wear and environmental conditions. Ensure the surface is clean and lightly abraded before recoating.
