Best current price£9.78from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.78Visit shop B&Q - Fireplace Paint 130Ml Sample Pot Terracotta 13 Stone Effect Heat Resistant Paint
Visit shop6 offers from £9.78 - £320.32
View price history by clicking the chart icon.
Stonelux Fireplace Paint is designed for homeowners looking to refresh or create a realistic stone effect on their fireplace surrounds, back panels, hearths, inglenook recesses, and nearby walls. Its key benefit is providing an authentic stone look and feel at a fraction of the cost of natural stone. A potential caveat is its specific suitability for areas exposed to higher temperatures, meaning it's not intended for direct contact with flames.
| Colour | Red |
|---|---|
| Model Part Number | TERRACOTTA 13 |
| Brand | Stonelux |
It can be used on plaster, stone, brick, concrete, and suitable pre-painted surfaces around fireplaces, hearths, and inglenooks. It is not suitable for direct flame contact.
Dust can be removed with a vacuum cleaner's brush attachment. For tougher marks, use a soft brush with mild soap and water.
Yes, it is designed for areas exposed to higher temperatures around wood-burning stoves, but it must not come into direct contact with flames.
Typically, two coats are recommended for good coverage and texture. A third coat can be applied for a more pronounced effect. Ensure adequate drying time between coats.
Yes, Stonelux Fireplace Paint can be applied using a spray gun. Ensure the paint is adequately thinned if necessary for your spray equipment and follow standard spraying best practices.
The paint is quick drying. However, allow for adequate drying time between coats and a full curing period before exposing the painted area to regular heat cycles.
Wash used brushes and rollers immediately with water after application.
Ensure the surface was thoroughly cleaned and dry before application. Re-sanding the surface lightly may improve adhesion. Check that no incompatible finishes were present.
Stir the paint thoroughly before and during application. Ensure consistent application technique with the brush, roller, or spray. Apply additional thin coats if needed for a more uniform look.
The ground stone content can create natural variations. Stirring the paint well is crucial. Consider testing on an inconspicuous area or using a sample pot first.
This can occur if applied too thickly or in very humid conditions. Ensure thin coats are applied and allow adequate drying time between coats. Improve ventilation if possible.
Setup: Ensure the surface to be painted is clean, dry, and free from dust, grease, or loose material. Light sanding may be beneficial on very smooth surfaces for better adhesion. Stir the paint thoroughly before use to evenly distribute the ground stone particles.
Compatibility: This paint is suitable for use on materials commonly found in fireplaces, including plaster, stone, brick, concrete, and existing non-shiny paint finishes. It is designed for use with gas, electric, and wood-burning stoves, but *not* for direct flame contact. Always ensure adequate ventilation when applying.
Care: To clean, use the brush attachment of your vacuum cleaner to remove dust. For more stubborn dirt or marks, use a soft brush with mild soap and water. Rinse gently and allow to dry. Avoid abrasive cleaners or harsh scrubbing.
