Best current price£9.78from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.78Visit shop B&Q - Fireplace Paint 130Ml Sample Pot Rich Buff 17 Stone Effect Heat Resistant Paint
Visit shop10 offers from £9.78 - £320.32
View price history by clicking the chart icon.
Stonelux Fireplace Paint is designed for homeowners looking to achieve a realistic stone effect on their fireplace surrounds, back panels, hearths, and inglenook recesses. Its key benefit is providing the aesthetic of a new stone fireplace at a significantly lower cost. A potential caveat is that while it's heat-resistant, it's intended for use around stoves and fireplaces, not directly on the hottest surfaces of a wood-burning stove itself. This water-based paint utilizes ground stone technology for an authentic finish, is quick and easy to apply with various tools, and dries rapidly, offering a durable, decorative coating suitable for areas exposed to higher temperatures.
| Colour | Brown |
|---|---|
| Model Part Number | RICH BUFF 17 |
| Brand | Stonelux |
It can be used on fireplace surrounds, back panels, hearths, inglenook recesses, and walls around gas, electric, and wood-burning stoves.
The paint is heat-resistant for areas around fireplaces and stoves but is not intended for direct application onto the hottest surfaces of a wood-burning stove itself.
For general dust and dirt, use a vacuum cleaner with a brush attachment. For tougher marks, a soft brush with soap and water is recommended.
Yes, Stonelux Fireplace Paint can be applied using a spray gun, as well as a brush or roller.
The paint is quick-drying. Specific drying times for recoating and full cure will be detailed in the product's technical data sheet, but generally, it allows for recoating within a few hours.
Applying in thin, even coats and using techniques like dabbing with a sponge or varying brush strokes can enhance the natural stone texture and appearance.
Since it is a water-based paint, brushes can be washed clean with water immediately after use.
Ensure the surface was properly cleaned and prepared before application. Check for any grease, dust, or loose material. Consider if a suitable primer was used if required for the substrate.
Apply paint evenly, avoiding overworking any single area. Ensure consistent brush strokes or roller application. Allow sufficient drying time between coats and apply additional coats if necessary for opacity.
The final color can be influenced by the base surface, application thickness, and lighting. Always test on an inconspicuous area first. Consider a sample pot if unsure about the final appearance.
Ensure adequate ventilation and that the paint was applied within recommended temperature and humidity conditions. Do not apply excessive coats too quickly. If issues persist, contact Stonelux for advice.
Preparation: Ensure the surface is clean, dry, and free from dust, grease, and any loose material. A primer may be necessary depending on the existing surface; consult Stonelux recommendations for specific substrates. For optimal results, apply in temperatures between 10°C and 25°C.
Application: Stir the paint thoroughly before use. Apply evenly using a brush, roller, or spray gun. Two or more coats may be required to achieve the desired stone effect and coverage. Allow adequate drying time between coats as per product instructions.
Compatibility: Suitable for use on fireplace surrounds, back panels, hearths, inglenook recesses, and walls around gas, electric, and wood-burning stoves. It is a water-based formulation.
Care: To clean, use a vacuum cleaner's brush attachment for dust and dirt. For more stubborn marks, use a soft brush with mild soap and water. Wash brushes and tools immediately after use with water.
