Best current price£67.31from B&Q
Shopping.co.uk recommended and popular offers
B&Q£67.31Visit shop B&Q - Fireplace Paint 1 Litre Ashridge 08 Stone Effect Heat Resistant Paint
Visit shop10 offers from £67.31 - £320.32
View price history by clicking the chart icon.
The Stonelux Fireplace Paint in Ashridge 08 Grey is designed for homeowners looking to achieve a realistic, natural stone effect on their fireplace surrounds, back panels, hearths, and inglenook recesses, especially those with wood-burning stoves. Its key benefit is providing a durable, heat-resistant decorative coating that mimics the look and feel of real stone at a fraction of the cost of natural materials. A potential caveat to consider is that it's a water-based paint, so proper preparation and application are crucial for optimal adhesion and heat resistance.
| Colour | Grey |
|---|---|
| Model Part Number | ASHRIDGE 08 |
| Brand | Stonelux |
Yes, Stonelux Fireplace Paint is heat resistant and suitable for hearths. However, ensure it has fully cured before exposing it to high temperatures and always adhere to safety guidelines for your specific heating appliance.
Apply in thin, even coats using a brush or roller, allowing sufficient drying time between coats. The infused ground stone particles create the texture; layering helps build depth and realism.
The paint is suitable for plaster, brick, stone, concrete, and previously painted surfaces. Always ensure the surface is clean, dry, and sound. Priming is recommended for porous surfaces.
The paint is typically touch-dry in 1-2 hours and recoatable after 2-4 hours. Full curing, where it reaches its maximum hardness and heat resistance, takes approximately 7 days.
You can easily clean the paint by vacuuming with a soft brush attachment to remove dust. For tougher marks, use a soft cloth or sponge with mild soap and water.
Yes, Stonelux Fireplace Paint can be applied using a spray gun. Ensure you follow the manufacturer's guidelines for thinning (if necessary) and spray application techniques for an even finish.
Coverage varies depending on the surface porosity and application thickness, but generally, one litre covers approximately 8-10 square meters per coat.
Ensure the surface was properly cleaned and prepared. Apply a suitable primer before painting. Check for any contaminants like oil or grease on the surface.
Ensure the paint was stirred thoroughly. Apply in thin, even coats, avoiding over-application. Use consistent strokes with your brush or roller.
This is usually due to applying the paint too thickly. Remove excess paint with a brush or cloth and reapply in thinner coats.
Ensure the paint has been allowed to cure fully (at least 7 days) before exposing it to high heat. Verify that the application is in an area suitable for ambient heat and not direct flame contact.
Setup:
Compatibility:
Care:
