Crown Walls & Ceilings Mid Sheen Emulsion Paint - Vintage Crush - 5L

A 'Mid Sheen' finish offers a subtle, soft reflective quality that is less glossy than silk or satin but not as flat as a matte finish. It helps to bounce light around the room without being overly reflective.

While it's wipeable and durable, for high-moisture environments like bathrooms and kitchens, paints specifically formulated with enhanced mold and mildew resistance are often recommended. This paint is suitable for general use throughout the home, but ensure good ventilation in such areas.

Yes, absolutely. The Crown breatheasy® 99% solvent-free formulation is designed to limit exposure to airborne triggers of asthma and allergies, making it an excellent choice for a healthier environment in children's rooms and throughout your home.

Info needed: coverage per liter. The coverage rate can vary depending on the porosity and texture of your surface. Always check the product label for specific coverage information.

'Vegan Verified' indicates that the product has been made using carefully selected ingredients and processes that do not involve animal products or animal testing.

This paint has a durable, wipeable finish. You can gently clean marks or spills using a soft, damp cloth. For tougher stains, a mild, non-abrasive detergent can be used, followed by a wipe with clean water. Avoid harsh scrubbing.

Ensure the surface was properly prepared, clean, and dry before painting. Apply paint evenly, avoiding excessively thick or thin patches. Allow sufficient drying time between coats. For highly absorbent surfaces, a primer or mist coat may be needed.

If painting over a strong or dark color, a specific primer might be beneficial. Ensure each coat is applied at the recommended thickness and allowed to fully dry. Additional coats may be necessary to achieve full opacity.

This can happen if paint is applied too thickly, if the surface is too warm, or if there's excessive moisture. Ensure the room temperature is moderate, and allow proper drying between thin, even coats. Avoid vigorous stirring that introduces air bubbles.