Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from grease, dirt, or rust.
- Lightly sand glossy surfaces and prime if necessary.
- Shake the spray can vigorously for at least one minute after the mixing ball begins to rattle.
- Hold the can upright, approximately 25-30 cm (10-12 inches) from the surface.
- Apply paint in light, even coats, using a steady back-and-forth motion. Overlap each stroke slightly.
- Allow 5-10 minutes between coats.
Compatibility: This paint is designed for multi-surface use including wood, metal, plastic, masonry, and laminate. Always test on an inconspicuous area first, especially on plastics, to check for compatibility and desired finish.
Care:
- Store the can upside down after use and spray for 2-3 seconds to clear the nozzle.
- Store in a cool, dry place, away from direct sunlight and heat.
- Clean up spills and tools immediately with mineral spirits or a suitable solvent.