Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from dust, grease, or rust. Lightly sand glossy surfaces for better adhesion.
- Shake the can vigorously for at least one minute after the mixing ball begins to rattle.
- Hold the can upright, approximately 10-16 inches from the surface.
- Apply paint in light, even strokes, overlapping each stroke slightly.
- For best results, apply multiple thin coats rather than one heavy coat.
Compatibility:
This spray paint is suitable for a wide range of surfaces including wood, metal, plastic, plaster, masonry, and more. Always test on a small, inconspicuous area if unsure.
Care:
Clean up wet paint immediately with mineral spirits or a similar solvent. Dried paint may be removed with paint stripper. Store the can upside down and spray for a few seconds to clear the nozzle after each use.