Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface is clean, dry, and free from dust, grease, and loose paint. Lightly sand glossy surfaces to improve adhesion.
- Shake the spray can vigorously for at least one minute after the mixing ball begins to rattle.
- Hold the can upright, approximately 10-16 inches from the surface.
- Apply paint in a steady, back-and-forth motion, slightly overlapping each stroke.
Compatibility:
This spray paint is designed for use on wood, metal, plaster, masonry, and previously painted surfaces. It is not recommended for direct application on plastics or polystyrene without a suitable primer.
Care:
Allow paint to dry to the touch within a few hours, but wait 24 hours for a full cure before heavy handling or cleaning. Clean up any drips or mistakes immediately with a cloth dampened with mineral spirits. For maintenance, wipe surfaces with a damp cloth. Store cans in a cool, dry place away from direct sunlight and heat.