Crown Walls & Ceilings Matt Emulsion Paint - Blue Gravel

Two coats are generally recommended for optimal coverage and a uniform finish. However, for darker colours over lighter surfaces, three coats might be necessary.

Crown Walls & Ceilings Matt Emulsion Paint is suitable for use on interior walls and ceilings made of plaster, brick, and wallpaper.

Priming is recommended, especially for previously painted surfaces, areas with stains, or when switching to a significantly different colour. It helps with adhesion and coverage.

The paint typically dries to the touch in 2-4 hours and is ready for a second coat after 4 hours. Drying times may vary depending on environmental conditions.

Wipe the surface gently with a damp cloth and mild detergent. Avoid using abrasive cleaners that can damage the matte finish.

While the paint is durable, it's not specifically designed for high-moisture environments. Ensure adequate ventilation in bathrooms and kitchens.

Coverage can vary depending on the surface and application method. Generally, you can expect around 13 m² per litre.

Clean up any splatters immediately with a damp cloth. Protect surrounding areas with drop cloths and masking tape.

Ensure the surface is properly prepared, and apply a second coat. Stir the paint thoroughly before application.

Use a high-quality brush or roller. Apply the paint in even strokes and avoid overworking the paint.

Ensure the surface is clean and properly prepared. If painting over existing paint, lightly sand the surface to improve adhesion.

Ensure you are viewing the colour in the correct lighting conditions. Apply a test patch before painting the entire surface.

Ensure adequate ventilation during and after painting. While low-odour, some smell is normal. If the odour is excessive, ensure the paint is within its expiry date.