Florint Self Adhesive Wall Tiles Stickers - Moroccan Mosaic Style - Blue - Geometric
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
These premium eco-friendly tile stickers are designed for homeowners looking to quickly and affordably refresh their kitchen or bathroom without the mess and cost of traditional renovation. Offering a durable, waterproof, and easy-to-apply solution, they provide a personalized decorative style. However, while removable, they are intended for temporary transformations and may require careful application on certain surfaces.
All features
| Colour | Blue |
|---|---|
| Pattern | Geometric |
| Brand | HORIWE |
Extended Product Information
FAQs
Are these tiles suitable for a shower area?
Yes, the tiles are fully waterproof and designed for use in shower areas, provided the surface is clean, flat, and properly prepared before application.
Can I apply these over existing tiles?
Yes, these stickers are designed to be applied directly over existing tiles, as long as the original tiles are clean, flat, and in good condition.
How long do these stickers typically last?
The durability depends on the application area and maintenance. With proper care, they can last for a significant period, but they are also designed for easy removal for temporary updates.
What is the best way to clean the stickers?
You can clean them with a damp cloth or sponge. Mild soap and water can be used for more stubborn marks. Avoid abrasive cleaners.
Can I use these on a textured wall?
These stickers adhere best to smooth, flat surfaces like ceramic, glass, or finished wood. Application on textured walls is not recommended as adhesion may be poor.
Are these stickers safe for kitchens?
Yes, they are safe for kitchens and can be used on backsplashes, countertops (if properly sealed and not a direct food contact surface), or cabinet fronts. The material is heavy-metal and formaldehyde-free.
What are the dimensions of each sticker?
The product description mentions '24Pcs - 10x10cm' for one of the variants, suggesting individual sticker dimensions can be around 10x10cm for certain packs.
Troubleshooting
Stickers not adhering well
Ensure the surface is thoroughly cleaned and completely dry before application. For surfaces with a slight texture, a stronger adhesive primer might be needed, or apply only to very smooth sections.
Air bubbles under the sticker
Gently lift the sticker back to the point of the bubble and reapply, smoothing outwards with a soft cloth or credit card. If the bubble is small and stubborn, you can carefully prick it with a fine needle and smooth it down.
Difficulty removing stickers
Gently heat the sticker with a hairdryer on a low setting for about 30 seconds to soften the adhesive. Peel slowly from a corner. If residue remains, it can typically be cleaned with water or a mild adhesive remover.
Color fading over time
While designed with colorfast technology, prolonged direct sunlight can cause fading. Avoid placing stickers in areas with constant, intense sun exposure or consider it a sign to redecorate.
Pros and Cons
Pros
- Easy and fast installation, no special tools required.
- Affordable alternative to full tile replacement.
- Waterproof and simple to clean.
- Removable without damaging existing surfaces.
- Eco-friendly material composition.
Cons
- Best suited for flat surfaces; may not adhere well to textured walls.
- Intended for temporary use; long-term adhesion may vary.
- Requires careful measurement to ensure proper fit and coverage.
- Colorfastness can be tested on a small, inconspicuous area first.
Setup, Compatibility & Care
Setup:
- Clean the Surface: Ensure the target surface is clean, dry, and free of dust, grease, or soap scum. For best results, clean with water or a mild detergent and allow it to dry completely.
- Measure: Measure your existing tiles or the area you wish to cover to determine the quantity needed. It's recommended to purchase slightly more than you think you'll need for potential adjustments.
- Apply: Peel off the backing paper from one sticker at a time. Carefully align the sticker with the edge of your existing tile or surface and press down firmly, smoothing out any air bubbles as you go.
- Trim (if necessary): Use a craft knife or scissors for any necessary trimming around edges or obstacles.
Compatibility:
- Apply to clean, flat surfaces.
- Suitable for ceramic tiles, glass, finished wood, appliances, doors, and windows.
- Not recommended for textured, unpainted, or rough surfaces.
Care:
- Clean with a damp cloth or sponge.
- Mild soap and water can be used for tougher marks.
- Avoid abrasive cleaners or scrubbing pads that could damage the surface.