Tile Stickers - Geometric - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
For DIY enthusiasts and homeowners looking to refresh spaces on a budget, these HORIWE Geometric Green Tile Stickers offer a simple, aesthetically pleasing solution to update kitchens, bathrooms, and more. Their waterproof and scratch-resistant vinyl makes them durable for high-traffic areas, though they are best applied to flat, smooth surfaces for optimal adhesion. Key features include durable vinyl construction, strong adhesive, easy peel-and-stick application, and a vintage Moroccan design.
All features
| Colour | Green |
|---|---|
| Pattern | Geometric |
| Model Part Number | 2 24Pcs |
| Brand | HORIWE |
Extended Product Information
FAQs
Are these stickers suitable for floors?
Yes, they can be used on floors, especially in low-traffic areas, as they are water and scratch-resistant. However, for high-traffic areas, consider their durability over time.
Can I use these in a shower area?
Yes, they are waterproof and suitable for shower areas. Ensure good ventilation to prevent excessive moisture buildup behind the stickers.
How do I remove the stickers without damaging my walls?
Gently heat the sticker with a hairdryer on a low setting, then slowly peel it away from the surface, starting at the edges. If any residue remains, it can typically be cleaned with a damp cloth or a mild adhesive remover.
Can I apply these over existing wallpaper?
It is not recommended to apply them over textured wallpaper, as adhesion may be poor. They work best on smooth, painted surfaces. If the wallpaper is smooth and well-adhered, a test patch might be advisable.
What are the exact dimensions of each sticker?
The product description mentions '2 24Pcs' which often refers to the quantity, and a variant specifies '24Pcs - 10x10cm'. Please refer to specific product packaging or listing for exact dimensions if not explicitly stated here.
Can these stickers be painted over?
These stickers are designed as a decorative finish themselves and are not intended to be painted over. Painting may affect their texture and adhesion.
How long does the adhesive typically last?
With proper application on a clean, smooth surface, the strong adhesive is designed for long-lasting application without peeling. Durability can vary based on environmental factors and surface wear.
Troubleshooting
Stickers are not sticking well or peeling at the edges.
Ensure the surface was thoroughly cleaned and dried before application. The surface must be flat, smooth, and free of dust or grease. If the adhesive seems weak, try gently warming the sticker with a hairdryer on a low setting and pressing firmly.
Air bubbles appear after application.
Use a credit card or a soft cloth to push the air bubbles towards the nearest edge. If bubbles are persistent, you can carefully prick them with a fine needle and smooth the area down.
Stickers are difficult to cut cleanly.
Use a sharp craft knife or precision scissors for clean cuts. Applying the sticker to a cutting mat before cutting can also help.
Pattern alignment is difficult for a seamless look.
When applying adjacent stickers, overlap slightly or ensure the pattern lines up precisely before pressing down firmly. Take your time and work in small sections.
Pros and Cons
Pros
- Easy to apply with a simple peel-and-stick method.
- Durable and resistant to water, heat, and scratches.
- Can be repositioned if applied incorrectly.
- Enhances decor with a unique vintage geometric design.
- Suitable for a wide variety of indoor surfaces.
- Leaves no residue and does not damage walls upon removal.
Cons
- Best suited for flat, smooth, and clean surfaces; may not adhere well to textured or uneven areas.
- Requires careful surface preparation for optimal adhesion.
- Color may vary slightly from on-screen representation.
- May require precise alignment for a seamless look, especially for larger areas.
Setup, Compatibility & Care
Setup:
- Clean the Surface: Ensure the target surface is clean, dry, smooth, and free from dust, grease, or any contaminants. For best results, use a mild detergent and water, then dry thoroughly.
- Measure and Cut: If necessary, measure the area and cut the stickers to the desired shape and size using sharp scissors or a utility knife.
- Peel and Apply: Carefully peel off the backing paper from one edge of the sticker. Align the sticker with the surface and slowly press it down, smoothing out any air bubbles as you go.
- Repositioning: If you make a mistake, gently peel the sticker back and reapply. Avoid stretching the material.
Compatibility:
These stickers are best applied to flat, clean, and smooth surfaces such as:
- Tiles (ceramic, porcelain)
- Glass
- Painted wood
- Plastic surfaces
- Metal
- Smooth walls (ensure paint is well-adhered)
They are *not* recommended for textured walls, rough wood, fabric, or surfaces that are constantly wet or exposed to high humidity without proper ventilation.
Care:
- Wipe clean with a damp cloth and mild soap if necessary.
- Avoid using abrasive cleaners or scouring pads, which can scratch the vinyl surface.
- Ensure adequate ventilation in areas like bathrooms and shower stalls to prevent moisture buildup behind the stickers.