HORIWE Marble Tile Stickers - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The HORIWE Marble Tile Stickers in White are ideal for homeowners seeking a quick, cost-effective, and mess-free way to refresh their kitchen or bathroom surfaces. These eco-friendly PVC tiles offer a durable, waterproof, and visually appealing upgrade, instantly transforming dated or damaged tiles. A key caveat is that they require a flat, clean, and smooth surface for proper adhesion.
All features
| Colour | White |
|---|---|
| Brand | HORIWE |
Extended Product Information
FAQs
Are these tiles truly waterproof?
Yes, the HORIWE Marble Tile Stickers feature a fully waterproof design, making them suitable for use in bathrooms, shower areas, and kitchens where moisture is present.
Can I apply these over existing wallpaper?
Yes, they can be applied to smooth, clean, and well-adhered wallpaper. Avoid applying to textured or peeling wallpaper.
How long do these stickers typically last?
When applied to a suitable surface and properly cared for, these durable PVC tiles are designed to resist cracking and color fading, providing a long-lasting decorative solution.
Will removing the stickers damage my walls or tiles?
No, the stickers are designed for damage-free removal. When peeled carefully, they should not damage the underlying surface.
What size are the individual stickers?
Each sticker measures 20cm x 20cm.
Can I use these on a curved surface?
These stickers are best suited for flat surfaces. Application on curved surfaces may result in poor adhesion and wrinkling.
How do I clean the stickers?
Simply wipe the surface with a damp cloth or sponge. Mild soap can be used for tougher grime, but avoid abrasive cleaners.
Troubleshooting
Stickers not sticking well
Ensure the surface is perfectly clean, dry, and smooth. Re-clean the surface and allow it to dry completely. Lightly scuffing a glossy surface can improve adhesion. Ensure you are not applying over grout lines unless the sticker is large enough to cover them.
Air bubbles trapped under the sticker
Use a credit card or a soft cloth to push the air bubbles towards the edge of the sticker. If the bubble is persistent, you may need to carefully peel back that section and reapply, smoothing as you go. For small bubbles, a pinprick can release trapped air.
Sticker is difficult to remove
Gently heat the sticker with a hairdryer on a low setting. This will soften the adhesive. Peel slowly and carefully from a corner.
Color appears different from expected
Ensure you are viewing the product in adequate lighting. Color perception can vary based on screen settings and ambient light. If significant discrepancy exists, check batch numbers if available for potential variations.
Pros and Cons
Pros
- Provides a fast and inexpensive way to update kitchen and bathroom aesthetics.
- Waterproof and durable, ensuring longevity in demanding environments.
- Easy to apply and remove without leaving residue or damaging surfaces.
- Made from eco-friendly materials, free from harmful chemicals.
- Low maintenance and simple to clean.
Cons
- Requires a perfectly flat, clean, and smooth surface for optimal adhesion.
- May not be suitable for textured or uneven surfaces.
- Requires careful measurement before purchase to avoid returns.
- Potential for color variations between different batches if ordering over time.
Setup, Compatibility & Care Instructions
Setup:
- Prepare the Surface: Ensure the target area is flat, clean, dry, and smooth. Remove any grease, soap scum, or dust. For best adhesion, lightly sand any glossy surfaces to create a slight grip, then wipe clean.
- Measure and Cut: Measure your existing tiles or the area you wish to cover. If necessary, cut the HORIWE Marble Tile Stickers to size using scissors or a utility knife. It's recommended to measure your tile size before purchase to avoid inconvenience.
- Apply the Sticker: Peel off the backing paper slowly, starting from one edge. Carefully align the sticker with your tile or surface and press it down firmly, smoothing out any air bubbles as you go.
- Overlap (Optional): For a seamless look, you can slightly overlap the edges of adjacent stickers.
Compatibility:
- Recommended Surfaces: Old tiles, ceramic tiles, glass, smooth painted wood, plastic surfaces, metal surfaces, appliances, and smooth wallpaper.
- Not Recommended Surfaces: Rough, textured, uneven, or unsealed surfaces. Avoid application on walls with active water leaks or areas that are constantly wet.
Care:
- Cleaning: Wipe the surface with a damp cloth or sponge. Mild soap can be used if necessary. Avoid abrasive cleaners or scouring pads, as these can damage the finish.
- Maintenance: Periodically check the edges for any lifting and press them down firmly if needed.