Best current price£17.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.95Visit shop B&Q - All-In-One Paint & PrimerMulti-Surface For WallsWoodInterior & ExteriorBaby Blue0.5LMatt
Visit shop20 offers from £17.95 - £59.95
View price history by clicking the chart icon.
The Evelyn Grant All-In-One Paint & Primer is designed for homeowners seeking a professional, durable finish across multiple surfaces with a single product. Its key benefit is its versatility as both a paint and primer, saving time and effort. A potential consideration is that advanced application techniques might require specific primer types for certain challenging surfaces, though its formulation aims for broad compatibility. This water-based emulsion is engineered in the UK for interior and exterior use, suitable for walls, ceilings, wood, furniture, doors, and even masonry and concrete.
| Colour | Blue |
|---|---|
| Model Part Number | 5056291351685 |
| Brand | EVELYN GRANT |
While engineered for a wide range of surfaces, direct application on unprimed, bare metal, especially in exterior or high-moisture environments, is not recommended without a suitable metal primer for optimal adhesion and rust prevention.
Drying times can vary. Typically, it is touch-dry in 1-2 hours and recoatable in 2-4 hours. Full curing can take several days. Cooler temperatures or higher humidity may extend these times.
Clean all application tools thoroughly with water immediately after use. Dried paint can be difficult to remove.
Yes, its durable formulation makes it suitable for interior walls and ceilings, including high-traffic areas. For maximum longevity, ensure proper surface preparation and consider two coats.
As a water-based emulsion, it has a lower odour compared to solvent-based paints. Ensure good ventilation during application and drying for the best experience.
Yes, but it is crucial to prepare the surface properly. Lightly sand the existing oil-based paint to create a key for adhesion and ensure it is clean and free of dust before applying the Evelyn Grant All-In-One Paint.
The Evelyn Grant All-In-One Paint & Primer is available in multiple finishes, including Matt, Eggshell, Satin, and Gloss, to suit various aesthetic preferences and functional requirements.
Ensure the surface was properly cleaned and prepared. Glossy surfaces may require sanding. Check for any contaminants like oil or dust. Reapply after ensuring thorough surface preparation.
Ensure paint is adequately stirred. Apply thin, even coats using a quality brush or roller. Avoid overworking the paint. Allow proper drying time between coats.
Clean affected area thoroughly to remove existing mould. Ensure adequate ventilation in the room. For persistent issues, consider a specific mould-inhibiting primer before applying the All-in-One paint.
Stir the paint thoroughly. If the paint is excessively thick due to storage conditions, ensure it is at room temperature. Avoid adding water unless explicitly recommended by the manufacturer for specific application methods like spraying, and do so sparingly.
Ensure you are using the correct colour code. Colours can appear different under various lighting conditions and on different surfaces. Test a small, inconspicuous area first. If painting a large area, ensure all paint from the same batch is used.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose material. Lightly sand glossy surfaces to improve adhesion. For very porous or chalky surfaces, a dedicated primer might still be beneficial.
Compatibility: Suitable for interior walls and ceilings, wood (furniture, doors, skirting boards), kitchen cupboards, bathroom surfaces, exterior masonry, render, stone, concrete, sheds, and fences. Avoid direct contact with food surfaces.
Application: Stir the paint thoroughly before use. Apply with a brush, roller, or sprayer. Two coats are generally recommended for best results, especially when changing colour significantly or painting over dark colours. Allow adequate drying time between coats as per manufacturer's recommendations, typically 2-4 hours.
Care: Clean application tools with water immediately after use. For painted surfaces, clean gently with a damp cloth and mild detergent. Avoid abrasive cleaners or excessive scrubbing to maintain the finish. Ensure good ventilation during and after application.
