Best current price£17.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.95Visit shop B&Q - All-In-One Paint & PrimerMulti-Surface For WallsWoodInterior & ExteriorAnthracite Grey0.5LMatt
Visit shop20 offers from £17.95 - £39.95
View price history by clicking the chart icon.
Evelyn Grant All-In-One Paint is designed for homeowners seeking a professional, durable finish across various interior and exterior surfaces. Its key benefit is the paint and primer in one formulation, simplifying the application process and reducing project time. A potential caveat is that for highly porous or damaged surfaces, additional preparation might still be necessary to achieve optimal results.
| Colour | Grey |
|---|---|
| Model Part Number | 5056291351722 |
| Brand | EVELYN GRANT |
While formulated for many surfaces, it is not specifically designed for high-heat areas like radiators. For best results on radiators, use a paint formulated for heat resistance.
For most surfaces, two coats are recommended to achieve a consistent and durable finish. However, this can vary depending on the original colour of the surface and the colour you are applying.
You can apply Evelyn Grant All-In-One Paint using a good quality brush, a roller, or a spray gun. Ensure you use tools appropriate for water-based emulsion paints.
Typically, the paint will be dry to the touch within 1-2 hours. Allow 4-6 hours between coats. Drying times can be longer in humid or cold conditions.
Yes, but the surface must be properly prepared. Clean the surface, lightly sand it to create a key, and wipe away dust before applying the Evelyn Grant All-In-One Paint.
Evelyn Grant All-In-One Paint provides a durable finish. However, for children's furniture, always check product specifications for suitability and ensure adequate drying and curing time has passed before use.
Clean up any spills or drips immediately with a damp cloth. Brushes, rollers, and equipment should be washed with warm, soapy water after use.
Ensure the surface was properly cleaned and prepared. Lightly sand glossy surfaces before application and wipe away dust.
Apply paint in thinner, even coats. Use a high-quality brush or roller suitable for emulsion paints. Maintain a wet edge to avoid lap marks.
Stir the paint thoroughly. If still too thick, a small amount of water (less than 5% by volume) can be added, but avoid over-dilution.
Ensure the area was thoroughly cleaned of existing mould before painting. Improve ventilation in the bathroom, as the paint offers protection but does not eliminate the cause of mould.
Colours can look different in varying light conditions and on different base colours. Ensure adequate coats have been applied, especially over dark substrates. Test in an inconspicuous area if unsure.
Preparation:
Application:
Compatibility:
Care:
