Regatta Holcombe Waterproof Mid Walking Boots - Brown - Gold - UK 9
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
Designed for the active male hiker, the Regatta Mens Holcombe IEP Mid Rise Walking Hiking Boots offer robust waterproofing and essential comfort for varied outdoor trails. While providing excellent stability and protection, it's important to choose the right size and allow for a short break-in period to ensure optimal comfort on longer treks.
All features
| Age Group | adult |
|---|---|
| Colour | Brown |
| Gender | Male |
| Material | Polyester |
| Shoe Size UK | 9 |
| Accent Colour | Gold |
| Series | Holcombe |
| Model Part Number | RMF573 |
| Brand | Regatta |
Extended Product Information
FAQs
Are these boots suitable for winter hiking?
These boots offer good waterproofing and support for cold, wet conditions. However, they are not insulated for extreme cold or designed for deep snow. For icy or very cold winter conditions, you may need specialized insulated winter boots.
How do I clean the boots after a muddy hike?
Remove loose dirt with a soft brush. Use a damp cloth and lukewarm water to wipe down the exterior. For stubborn mud, a mild boot cleaning gel can be applied. Rinse thoroughly and allow to air dry naturally away from direct heat.
What kind of socks should I wear with these boots?
We recommend wearing moisture-wicking hiking socks made from wool or synthetic blends. These socks help manage sweat, prevent blisters, and provide additional cushioning and warmth compared to cotton socks.
Do I need to re-waterproof these boots?
Over time, the outer water-repellent treatment (`Hydropel`) will wear off. While the internal `Isotex` membrane keeps them waterproof, re-applying a DWR (Durable Water Repellent) spray or treatment suitable for synthetic footwear will help prevent the outer material from saturating, keeping the boots lighter and more breathable. Re-proof when water no longer beads off the surface.
What is the difference between mid-rise and low-rise hiking boots?
Mid-rise boots, like the Holcombe IEP, extend above the ankle, offering enhanced ankle support and protection against debris. Low-rise boots cut off below the ankle, providing more flexibility and often being lighter, but with less ankle stability.
Are these boots breathable?
Yes, while waterproof, the `Isotex` membrane is designed to be breathable, allowing moisture vapor from your feet to escape. This helps to keep your feet comfortable and reduces sweat build-up, though no waterproof boot is as breathable as a non-waterproof mesh shoe.
Troubleshooting
My feet are getting wet inside the boots.
First, check for any visible damage to the boot's outer material or seams. If none, the DWR (Durable Water Repellent) coating might have worn off. Clean the boots thoroughly and apply a suitable re-proofing spray for waterproof breathable footwear. Ensure gaiters or rain trousers are properly covering the top of the boots to prevent water ingress from above.
I'm experiencing discomfort or blisters during hikes.
Ensure you have broken in the boots sufficiently with shorter walks before long treks. Check your lacing; it should be snug but not too tight. Make sure you're wearing appropriate moisture-wicking hiking socks, as cotton socks can cause friction and retain moisture. Consider trying different lacing techniques or aftermarket insoles if discomfort persists.
The boots feel slippery on certain surfaces.
While the sole is designed for varied terrains, no boot is slip-proof on all surfaces. Ensure the tread is clean of mud or debris, as this can reduce grip. Evaluate the type of surface you are on; very wet rocks or ice may require specialized footwear or extra caution. If the tread is significantly worn, it might be time to replace the boots for safety.
Pros and Cons
Pros
- Excellent waterproofing keeps feet dry in wet weather.
- Mid-height design provides strong ankle support and stability.
- Durable construction with reinforced toe and heel for longevity.
- Comfortable padding reduces fatigue during long hikes.
- Effective water repellent technology prevents boot saturation.
Cons
- May require a short break-in period for optimal comfort.
- Could feel warm in very hot climates due to waterproofing features.
- Polyester material may not offer the same ruggedness as leather in extreme conditions.
Setup, Compatibility & Care
Setup
- Initial Fitting: Try on the boots with the type of socks you typically wear for hiking (e.g., moisture-wicking hiking socks). Ensure there's a thumb's width of space between your longest toe and the end of the boot. Your heel should feel secure with minimal slippage.
- Lacing: Lace the boots firmly but not too tightly. Utilize all eyelets to distribute pressure evenly and maximize ankle support. A proper lacing technique can prevent discomfort and improve stability.
- Break-in Period: While comfortable out of the box, it's recommended to wear the boots for shorter walks around your home or neighborhood before embarking on a long hike. This allows the boots to conform to your feet and reduces the chance of blisters.
Compatibility
These Regatta Holcombe IEP boots are primarily designed for outdoor walking and hiking. They are compatible with standard hiking attire such as:
- Moisture-wicking hiking socks
- Waterproof or water-resistant hiking trousers
- Gaiters for added protection in very wet or muddy conditions
- Backpacks and other hiking gear
They are suitable for use on trails, paths, and varied natural terrain. While they offer good grip for most conditions, they are not specialized for technical climbing or extreme icy environments.
Care Instructions
Proper care will extend the life and performance of your boots:
- Cleaning: After each use, especially if muddy, clean your boots. Remove laces and insoles. Use a soft brush or damp cloth with lukewarm water to remove dirt and debris. For stubborn stains, a mild soap specifically designed for outdoor footwear can be used. Do not use harsh detergents or washing machines.
- Drying: Allow the boots to air dry naturally at room temperature. Avoid direct heat sources like radiators or campfires, as this can damage the materials and adhesives. You can stuff them with newspaper to absorb moisture and help maintain their shape, changing the newspaper periodically.
- Waterproofing Maintenance: The Hydropel finish will eventually wear off with use. To maintain the waterproof and water-repellent properties, periodically apply a re-proofing spray or treatment suitable for synthetic and waterproof breathable footwear. Follow the product instructions carefully.
- Storage: Store your boots in a cool, dry place away from direct sunlight when not in use. Ensure they are clean and completely dry before storing to prevent mildew and material degradation.