Sadolin Extra Durable Woodstain - Redwood - 1L

It is suitable for use on all softwood and hardwood joinery, such as doors and windows. It's not recommended for decking or areas subject to heavy wear.

Two coats are recommended for optimal protection and appearance. For new wood, a base coat of Sadolin Classic is recommended first.

The surface should be clean, dry, and free from old coatings, dirt, and grease. Sand the wood to create a smooth surface before application.

Drying times can vary. Refer to the product label for specific drying times between coats and before use.

No, Sadolin Extra is not suitable for decking or areas subject to heavy wear.

Clean brushes and tools immediately after use with a suitable solvent, such as white spirit.

The reapplication frequency depends on exposure to the elements and wear. Inspect your joinery annually and reapply when needed to maintain protection and appearance.

Ensure the wood surface is properly prepared by sanding and cleaning. Apply the stain evenly, following the wood grain, and avoid excessive build-up.

Check the temperature and humidity levels. Ensure adequate ventilation and allow sufficient drying time between coats as per the product instructions.

Apply a maintenance coat as needed to refresh the color and maintain protection.