Cuprinol Garden Shades Tester Paint Pot - 125Ml - Mellow Moss

Best current price£10.11from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.11Visit shop B&Q - Garden Shades Tester Paint Pot125MlEmerald Stone
Visit shop
Best current price£10.11from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.11Visit shop B&Q - Garden Shades Tester Paint Pot125MlEmerald Stone
Visit shop2 offers from £10.11
View price history by clicking the chart icon.
Cuprinol Garden Shades is a water-based paint designed for homeowners looking to add durable color and protection to sheds, fences, and other garden wood. It offers up to 6 years of protection while allowing the natural wood grain to show through, providing a rich, matte finish. A key benefit is its versatility for various garden wood applications, though users should note that coverage can vary significantly based on application method and surface condition.
| Colour | Green |
|---|---|
| Model Part Number | 5839427 |
| Brand | Cuprinol |
Cuprinol Garden Shades offers protection for up to 6 years when applied correctly to suitable surfaces.
No, this product is not designed for decking or surfaces that experience heavy foot traffic. Use a product specifically formulated for decking.
Clean your brushes immediately after use with water and a little soap. If the paint dries, it becomes much harder to remove.
Cuprinol Garden Shades provides a matt finish that allows the natural texture of the wood grain to show through.
Yes, Cuprinol Garden Shades can be applied by brush or spray. Ensure you follow specific instructions for spray application to achieve the best results.
Coverage is approximately 10m² per litre, but this can vary depending on the application method and the condition and nature of the surface being painted.
For bare wood, it is recommended to apply a suitable wood preservative before applying Cuprinol Garden Shades for optimal protection against rot and insect attack.
Ensure the surface was properly prepared (clean, dry, free of contaminants) and that a suitable primer or preservative was used on bare wood if necessary. Light sanding can also improve adhesion.
Stir the paint thoroughly before and during application. Ensure even coats are applied, paying attention to application method (brushing or spraying) to avoid lap marks. Allow sufficient drying time between coats.
Clean brushes immediately after use with plenty of water and soap. Dried paint may be difficult to remove.
Coverage rates are estimates. Adjust application thickness based on the porosity and condition of the wood. Porous surfaces will absorb more paint. Ensure you are not applying too thinly.
Preparation: Ensure the wood surface is clean, dry, and free from dirt, grease, and previous flaking coatings. Lightly sand rough surfaces if necessary. For bare wood, apply a suitable preservative first.
Application: Stir the paint thoroughly before use. Apply using a brush or spray. Two coats are recommended for best results, allowing adequate drying time between coats (check product for specific times).
Compatibility: This product is designed for use on sheds, fences, garden furniture, and other garden wood. It is not recommended for decking or other surfaces that experience heavy foot traffic.
Care: Clean brushes and equipment immediately after use with water. Store leftover paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.