Cuprinol Garden Shades Tester Paint Pot - 125Ml - Blue Slate

Best current price£10.11from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.11Visit shop B&Q - Garden Shades Tester Paint Pot125MlBlue Slate
Visit shop
Best current price£10.11from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.11Visit shop B&Q - Garden Shades Tester Paint Pot125MlBlue Slate
Visit shop2 offers from £10.11
View price history by clicking the chart icon.
Cuprinol Garden Shades is designed for homeowners looking to add a rich, protective colour to sheds, fences, and other garden wood. Its key benefit is providing up to 6 years of protection while allowing the natural wood grain to show through, offering a beautiful matt finish. A potential caveat is that coverage can vary significantly based on application method and surface condition.
| Colour | Blue |
|---|---|
| Brand | Cuprinol |
Cuprinol Garden Shades offers protection for up to 6 years, depending on exposure to weather and wear.
No, this product is not recommended for use on decking or surfaces in direct contact with soil.
It can be applied by brush for a traditional finish or by spray for faster coverage. Two coats are generally recommended.
Clean brushes and equipment immediately after use with water. Soap and water can be used for more stubborn residue.
Cuprinol Garden Shades colours and protects the wood while allowing the natural grain to show through. It provides a breathable finish, not a complete seal.
It provides a matt finish, which is a non-glossy, natural-looking appearance.
Yes, provided the surface is properly prepared. Ensure the old finish is sound or removed, and the surface is clean and dry. For best results, test on an inconspicuous area first.
Ensure the paint was thoroughly stirred before and during use. Apply subsequent coats evenly, and ensure the surface was properly prepared and dry before the first coat.
The surface may not have been clean, dry, or properly prepared. Ensure all previous finishes, dirt, and mould were removed and that the wood was lightly sanded if necessary.
Coverage is highly dependent on the surface porosity and application method. Ensure you are applying a consistent layer and consider that rough or very absorbent wood will require more paint.
If necessary and only if recommended by the manufacturer for spray application, thin slightly with water. However, avoid over-thinning, as this can affect protection and colour.
Preparation: Ensure all garden wood surfaces are clean, dry, and free from dust, mould, or old finishes. For best adhesion, lightly sand smooth surfaces. Remove any loose particles before application.
Compatibility: This product is specifically designed for use on sheds, fences, garden furniture, and other bare or previously treated garden wood. It is not intended for decking or surfaces that will be in direct contact with soil.
Application: Stir the paint thoroughly before use. Apply evenly using a brush or spray. Two coats are recommended for optimal protection and colour depth. Allow adequate drying time between coats as per the manufacturer's instructions.
Care: Clean brushes and equipment immediately after use with water. Store the paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed to preserve the paint's quality.