Cuprinol Garden Shades Tester Paint Pot - 125Ml - Brown

Cuprinol Garden Shades offers protection for up to 6 years when applied correctly, depending on environmental exposure and maintenance.

This product is not specifically designed for decking and may create a slippery surface. It is best used on vertical surfaces like fences and sheds.

No primer is typically required. Ensure the wood is clean and dry. For very porous or bare wood, a second coat may provide better coverage and protection.

Generally, two thin coats are recommended for best color and protection. Follow the product's coverage guidelines.

Coverage is up to 10m² per litre, but this can vary depending on the application method and the condition and type of wood surface.

Avoid application in temperatures below 5°C or when rain is expected, as this can affect drying and adhesion.

Garden Shades is primarily a colorant and protector with a decorative finish, while fence preservers are typically clear or subtly tinted products focused on deep wood protection against rot and insect attack.

Ensure paint is thoroughly stirred before and during use. Apply thin, even coats. For difficult areas, consider using a smaller brush or testing spray application.

Verify the wood surface was clean, dry, and free from contaminants before application. Ensure no previous coatings were peeling or unstable.

Wood color and type significantly affect the final shade. Always test on a small, inconspicuous area first. Colors may appear darker when wet than when dry.

Clean tools with water immediately after use. If paint has dried on tools, use a specific brush cleaner or repeat washing with soap and water.