Cuprinol Anti Slip Decking Stain - Natural Oak - 5L

Approximately 8 m² per liter.

Apply 2-3 coats for optimal protection and appearance.

Minimum drying time is 2 hours, with a recoat time of 6 hours. Maximum drying time is 6 hours.

Yes, but you must clean the surface with Cuprinol Decking Cleaner and water to remove dirt and grease and allow to dry before application.

No, it is designed for outdoor use only.

Avoid applying the stain if rain is likely before the product has dried. If rain occurs shortly after application, allow the deck to dry and reapply the stain once the surface is completely dry.

Remove as much stain as possible from brushes and rollers before cleaning with water.

Do not use or store in extremes of temperature or wet conditions. Store in a cool, dry place.

Ensure the surface is properly prepared, clean, and dry. Sand the surface to provide a key for the stain.

Stir the stain thoroughly before and during application. Apply coats evenly, avoiding overlaps.

Ensure you are using the correct product, Cuprinol Anti-Slip Decking Stain. Ensure application instructions are followed, including the correct number of coats.