Metolux 2 Part Wood Filler - 770Ml - Mahogany

Yes, it can be used on painted wood, but for best adhesion, it's recommended to sand the painted surface to provide a key, and ensure it's clean and dry before application.

Curing time can vary based on temperature and humidity. Typically, it becomes sandable within 20-30 minutes, but full cure may take longer. Refer to the product's specific instructions for precise times.

Yes, its weatherproof formulation makes it suitable for outdoor furniture and other exterior wood repairs.

While not explicitly recommended, some users experiment with mixing colors. However, it's best to test on a small, inconspicuous area first to ensure compatibility and desired results.

When stored correctly in sealed containers, the product typically has a shelf life of 1-2 years. Always check the batch date and manufacturer's recommendations.

It's best to let the filler cure sufficiently before sanding. While it may feel hard after a short period, waiting for a more complete cure ensures it sands smoothly without clogging sandpaper.

This two-part filler is designed for minimal shrinkage. However, very deep repairs might require filling in layers to prevent any potential minor settling.

Ensure the filler and hardener were mixed in the correct ratio and thoroughly combined. Check the ambient temperature; curing is slower in cold conditions. Ensure the hardener is not expired or contaminated.

This can happen if too much hardener was used or if mixing generated significant heat. Work quickly or adjust the ratio slightly for future batches (following manufacturer guidance).

This usually indicates the repair was not filled deeply enough or the product was applied too thinly for the depth of the damage. For deep repairs, apply in layers, allowing each to cure partially.

The wood surface may not have been properly prepared. Ensure it was clean, dry, and free from dust, grease, or any existing finishes that could prevent adhesion.