Best current price£8.60from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£8.60Visit shop Metolux 65443 2 Part Styrene Free Wood Filler - Redwood 275Ml Tin 1
Visit shop
B&Q£14.05Visit shop - Metolux 2 Part Styrene Free Wood Filler 275MlRedwood
Visit shop11 offers from £8.60 - £22.75
View price history by clicking the chart icon.
The Metolux 2 Part SF Wood Filler is a professional-grade, high-strength polyester filler designed for durable wood repairs. It's ideal for tradespeople and serious DIYers needing a robust solution for imperfections. A key benefit is its paintable and stainable finish, allowing seamless integration with existing woodwork, though users must ensure accurate colour matching for optimal aesthetic results.
| Colour | Red |
|---|---|
| Model Part Number | PTDTIM65444 |
| Brand | Metolux |
The product should be mixed thoroughly until a uniform colour is achieved, typically following the proportions indicated on the packaging or accompanying instructions. Aim for a consistent colour to ensure proper curing.
This filler is designed for bare wood. For application over existing paint, the paint must be removed, or the filler may not adhere properly. It is best used on clean, prepared wood.
Cure times can vary depending on temperature, humidity, and the thickness of the application. Generally, it becomes touch-dry relatively quickly but requires several hours for a full cure before sanding or finishing. Refer to the product packaging for specific drying times.
While the filler provides a high-strength and durable repair, it is primarily intended for cosmetic and non-structural wood imperfections. For load-bearing structural repairs, consult with a professional.
Yes, the formulation is weatherproof and suitable for both interior and exterior applications, designed to flex with the natural movement of timber.
The filler accepts all known paint systems, varnishes, and stains, allowing for seamless integration with existing woodwork.
Tools should be cleaned immediately after use with appropriate solvents. Check the product packaging or safety data sheet for recommended cleaning agents.
Ensure the correct ratio of filler to hardener was used. Double-check that the hardener was thoroughly mixed into the filler until a consistent colour was achieved. Extreme cold temperatures can also slow curing; try to work in a warmer environment.
While the formula is non-slump, very deep repairs might require application in layers. Ensure the surface is properly prepared and free of dust or loose material. If significant shrinkage occurs, it may be due to an incorrect mix ratio or inadequate drying conditions.
Allow the filler to cure completely before sanding. If it is still too soft, refer to the curing issue. If it is excessively hard, the hardener amount may have been too high or the curing time too long. Use appropriate grit sandpaper for wood fillers.
Setup: To use, dispense the required amount of filler and hardener onto a clean surface or mixing tray. Mix thoroughly until a uniform colour is achieved. Apply the mixed filler to the clean, dry, and sound wood surface using a spreader, pressing firmly into the repair area. Aim for a slight overfill to allow for sanding.
Compatibility: This wood filler is compatible with most standard paint systems, varnishes, lacquers, and wood stains. It is designed for use on wood materials.
Care: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the lid is tightly sealed after each use to maintain product integrity. Clean tools immediately after use with appropriate solvents (check product label for specifics).
