Metolux 2 Part Styrene Free Wood Filler - Redwood

Yes, for larger holes, it is recommended to apply the filler in layers, allowing each layer to partially set before applying the next. This prevents excessive shrinkage and ensures a strong bond.

Drying and curing times vary depending on the temperature and humidity. Typically, it can be sanded and over-coated within a few hours, but full curing may take longer.

Yes, the formulation is weatherproof and designed for both interior and exterior applications, making it suitable for outdoor furniture.

Absolutely. The filler accepts all finishes, including all known paint systems and varnishes, once it is fully cured.

Yes, Metolux offers this wood filler in various pre-coloured blends to match different wood types. The 'Redwood' variant is one specific color option.

When stored correctly in its original, tightly sealed container in a cool, dry place, the product generally has a long shelf life. Refer to the packaging for specific date information.

Tools should be cleaned immediately after use with a suitable solvent while the filler is still wet. Once hardened, it can be difficult to remove.

Ensure the correct ratio of filler to hardener was used. Check that the components were mixed thoroughly. Ambient temperature may be too low; try to work in a warmer environment.

The hardener may have been mixed in too quickly or in excessive amounts. Ensure precise measurements are followed. Avoid over-mixing.

This can occur if applied too thickly in a single application. For deep repairs, apply in layers, allowing each layer to partially set before applying the next. Ensure the correct product ratio is used.

The wood surface may not have been properly prepared. Ensure it is clean, dry, and free from dust, grease, or loose paint/varnish before application.