Best current price£11.34from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£11.34Visit shop Sadolin 5028565 Extra Durable Woodstain Mahogany 500Ml
Visit shop
The Paint Shed£14.69Visit shop Sadolin Rosewood Extra Durable Woodstain Ready Mixed 500Ml
Visit shop
B&Q£14.86Visit shop B&Q - Extra Durable Woodstain 500Ml African Walnut
Visit shop134 offers from £11.34 - £56.86
View price history by clicking the chart icon.
This Sadolin Classic All Purpose Woodstain in Dark Palisander is designed for homeowners and DIY enthusiasts seeking deep, penetrating protection for a wide range of wooden surfaces, both indoors and outdoors. Its key benefit is providing durable protection against the elements and wear, while its main caveat is its solvent-based nature, requiring good ventilation during application. This matt finish wood stain is versatile, suitable for cladding, facias, decking, garden furniture, and rough-sawn timber externally, and can serve as a base coat for interior wooden floors before polyurethane varnish.
| Colour | Brown |
|---|---|
| Model Part Number | 5028476 |
| Brand | Sadolin |
Yes, Sadolin Classic Wood Protection is ideal for use on exterior decking, providing deep penetrating protection against the elements and wear.
Yes, it can be used as a base coat on interior wooden floors before applying a polyurethane varnish. Ensure the floor is clean and dry before application.
The surface must be clean, dry, and free from dust, grease, and loose materials. Sand down any rough areas and remove any old, flaking coatings. For new wood, ensure it is sound.
For best results and optimal protection, it is recommended to apply two to three coats. Allow adequate drying time between each coat.
Drying times can vary depending on temperature, humidity, and application thickness. Generally, it is touch dry in 4-6 hours and recoatable after 16-24 hours. Always ensure good ventilation.
Clean brushes and equipment immediately after use with a suitable solvent thinner. Do not allow the stain to dry on the brushes.
No, Sadolin Classic Wood Protection is specifically designed for use on wood surfaces only.
Ensure the surface was properly prepared and that the stain was applied evenly. Stir the product thoroughly before and during application. Apply a further thin coat if necessary, ensuring adequate drying time between coats.
This could be due to applying the stain too thickly, insufficient ventilation, or low ambient temperatures. Ensure good ventilation and apply in a temperature range of 10°C-25°C. If still tacky, allow more time for drying in a well-ventilated area. Avoid applying subsequent coats until the previous one is fully dry.
Ensure the wood was dry before application and that sufficient coats were applied to achieve a protective barrier. For severely damaged wood, repair or replace the affected sections before applying the woodstain. This product protects against moisture but does not repair existing damage.
Use a suitable solvent thinner immediately after use. If the stain has dried on the brush, it will be very difficult to remove and the brush may be ruined.
Preparation: Ensure all wooden surfaces are clean, dry, and free from dust, grease, and loose materials. For previously treated or painted surfaces, remove all loose or flaking coatings. Sand down any rough areas. If applying to a new or bare surface, ensure it is sound.
Application: Stir the woodstain thoroughly before use. Apply using a good quality brush. For exterior use, apply in dry conditions, ideally between 10°C and 25°C, and avoid direct sunlight or high temperatures. Apply two to three coats for best results, allowing adequate drying time between coats. For interior wooden floors, apply as a base coat before a polyurethane varnish, following the varnish manufacturer's instructions.
Compatibility: This product is a solvent-based wood stain. It is compatible with itself and suitable for use on various wood types, including cladding, facias, decking, garden furniture, and rough-sawn timber. It is also suitable as a base coat for wooden floors before applying polyurethane varnishes. Always test on an inconspicuous area first if unsure.
Care & Cleanup: Clean brushes and equipment immediately after use with a suitable solvent thinner. Store any unused product in its original container with the lid tightly closed in a cool, dry place, away from direct sunlight and sources of ignition.
Sadolin Classic Wood Protection - EbonyFrom £19
Sadolin Classic Wood Protection - Redwood - 5 LitreFrom £85
Sadolin Quick Drying Woodstain - Jacobean Walnut - 1LFrom £23
Sadolin Extra Durable Woodstain - BlackFrom £20
Sadolin Beautiflex Solvent Opaque Woodstain - Black - 2.5LFrom £52
Sadolin Beautiflex Solvent Opaque Woodstain - White - 2.5LFrom £52
Sadolin Superdec Opaque Satin Wood Protection - WalnutFrom £26
Sadolin Wet Wood Decking Stain - Dusky Oak - 2.5 LFrom £33
Sadolin Wet Wood Decking Stain - 2.5 L - Grey SlateFrom £27
Sadolin Superdec - WhiteFrom £26
Sadolin Decking Oil 2 in 1 - Dusky Oak - 2.5LFrom £28
Sadolin Superdec Exterior Woodstain - Black Satin Finish 5LFrom £86
