Bedec Extra Flex Masonry Paint - Suffolk Pink - 5 Litre
Best current price£55.89from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£55.89Visit shop B&Q - Extra Flex Masonry Paint5 Litre Suffolk Pink
Visit shopB&Q£55.89Visit shop All Offers
2 offers from £55.89 - £56.99
View price history by clicking the chart icon.
eBayBedec Extra Flex Flexible Masonry Paint Exterior Suffolk-Pink Low-Sheen 5L
Free delivery in 1–3 days
£56.99
Visit shop
Product Information
Full details
Bedec Extra-Flex Masonry Paint is designed for homeowners and DIY enthusiasts looking to protect and beautify exterior masonry surfaces. Its key benefit is its exceptional flexibility, which bridges fine cracks and prevents new ones caused by substrate movement, offering a long-lasting, smooth finish. A potential caveat is that coverage can vary significantly based on the surface's texture and porosity, requiring careful calculation before purchase.
All features
| Colour | Pink |
|---|---|
| Model Part Number | BEDE2MB0773/46 |
| Brand | Bedec |
Extended Product Information
FAQs
What surfaces can Bedec Extra-Flex Masonry Paint be used on?
It is ideally suited for exterior masonry, roughcast, pebble-dash, brickwork, cement, and concrete rendered surfaces.
How flexible is the paint?
The paint is designed to stretch up to 400% to accommodate substrate movement and bridge fine cracks.
What is the coverage rate?
Coverage is approximately 9-11 sq meters per litre per coat, but this depends heavily on the texture and porosity of the substrate.
Can I apply this over existing paint?
Yes, it can be applied to previously painted surfaces after suitable preparation, ensuring the existing paint is sound and well-adhered.
Is it suitable for damp walls?
While it provides microporous protection, it is essential to address the source of any dampness. The paint is designed for sound, dry masonry surfaces.
How do I clean brushes and rollers after use?
Being a water-based paint, application tools can be cleaned easily with water immediately after use.
What is the drying time?
It is quick-drying, but specific drying times will depend on ambient temperature and humidity. Allow adequate time for recoating.
Troubleshooting
Paint not adhering well
Ensure the surface was properly prepared, clean, dry, and free from dust or contaminants. Check that the surface is not excessively porous or smooth, and consider an appropriate primer if needed.
Cracking or peeling after application
This can indicate insufficient flexibility, improper surface preparation, or application in adverse weather conditions. Ensure the surface is stable and the paint is applied within the recommended temperature and humidity ranges.
Uneven finish or brush marks visible
Apply the paint with consistent pressure and even strokes. Ensure paint is adequately stirred. For a smoother finish, consider using a high-quality roller designed for masonry or a spray application.
Coverage seems lower than expected
Substrate porosity and texture significantly impact coverage. Thicker application or highly absorbent surfaces will reduce coverage per litre. Ensure you have sufficient paint based on an accurate measurement of the area and the substrate's condition.
Pros and Cons
Pros
- Excellent flexibility prevents cracking on moving substrates.
- Provides a durable, long-lasting protective layer.
- Bridges fine existing cracks for a smoother finish.
- Low odour and quick drying for user convenience.
- Suitable for a wide range of exterior masonry applications.
Cons
- Coverage rate is dependent on surface porosity and texture.
- May require multiple coats for optimal protection and finish.
- Preparation of the existing surface is crucial for adhesion.
- Not suitable for non-porous surfaces without proper priming.
- Specific colour availability may vary.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from loose paint, dirt, and grease. Previously painted surfaces should be thoroughly washed and, if necessary, lightly abraded. Allow new render or concrete to cure for at least 28 days before application.
Compatibility: Suitable for exterior masonry, roughcast, pebble-dash, brickwork, cement, and concrete rendered surfaces. Can be applied over existing masonry paint after proper preparation. Not recommended for use on highly glossy surfaces without appropriate priming.
Application: Can be applied by brush, roller, or spray. Stir well before use. Apply one or two coats as needed, allowing adequate drying time between coats. Recommended coverage is approximately 9-11 sq meters per litre per coat, but this varies with substrate texture and porosity.
Care: Clean application tools immediately after use with water. For cleaning painted surfaces, use a damp cloth or sponge with mild detergent. Avoid abrasive cleaners.