Bedec Extra Flex Masonry Paint - Cream
Best current price£55.89from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£55.89Visit shop B&Q - Extra Flex Masonry PaintCream5 Litre
Visit shopB&Q£55.89Visit shop All Offers
2 offers from £55.89 - £56.99
View price history by clicking the chart icon.
eBayBedec Extra Flex Flexible Masonry Paint Exterior Cream Low-Sheen 5L
Free delivery in 1–3 days
£56.99
Visit shop
Product Information
Full details
The Bedec Extra Flex Elastomeric Masonry Paint is designed for homeowners and professionals seeking a durable, flexible, and long-lasting protective coating for exterior masonry surfaces. Its key benefit is the ability to stretch and bridge fine cracks, preventing future damage caused by substrate movement. A potential caveat is the need for proper surface preparation to ensure optimal adhesion and performance.
All features
| Colour | Cream |
|---|---|
| Model Part Number | BEDE2MB1864 |
| Brand | Bedec |
Extended Product Information
FAQs
What surfaces can Bedec Extra Flex Masonry Paint be used on?
It is ideally suited for exterior masonry, roughcast, pebble-dash, brickwork, cement, and concrete rendered surfaces. It can also be applied to previously painted surfaces after suitable preparation.
How much paint do I need?
Coverage is approximately 9-11 square meters per litre per coat when applied by brush or roller. This will vary depending on the texture and porosity of the surface.
Can I spray this paint?
Yes, Bedec Extra Flex Masonry Paint can be applied by brush, roller, or spray.
What is the benefit of it being 'elastomeric'?
Elastomeric means the paint is flexible and can stretch up to 400%. This allows it to bridge and prevent fine cracks caused by the natural movement of masonry, offering long-lasting protection.
How long does it take to dry?
It is water-based and quick-drying. Drying time between coats is typically 2-4 hours, but this can vary depending on temperature and humidity.
Do I need a separate primer?
The paint is 'self-priming', meaning it can often be applied directly to suitable prepared surfaces, reducing the need for a separate primer coat.
How should I clean my tools after use?
Clean application tools immediately after use with water.
What should I do if I see mould on the painted surface?
Clean the affected area with a damp cloth and mild detergent. Ensure the underlying cause of mould growth is addressed, such as persistent dampness.
Troubleshooting
Paint not adhering well or peeling
Ensure the surface was properly prepared, clean, dry, and free from dust, grease, or loose material before application. For powdery surfaces, a suitable primer or sealer may be required.
Uneven finish or brush marks visible
Apply in thin, even coats, maintaining a wet edge. Ensure consistent application technique with your chosen tool (brush, roller, or spray). Stir paint frequently during application.
Paint drying too quickly or brush marks appearing
Avoid applying in very hot, dry, or windy conditions. Work in smaller sections and maintain a wet edge to prevent premature drying and lap marks.
Cracks reappearing after painting
Ensure the paint is applied generously enough to bridge the fine cracks. For larger structural cracks, these may need to be repaired with appropriate filler before painting.
Mould or mildew growth on painted surface
Ensure the surface was thoroughly cleaned of existing mould/mildew before painting. Address any underlying moisture issues causing re-growth. Clean affected areas with a suitable mild detergent and water.
Pros and Cons
Pros
- Excellent crack-bridging capabilities due to its high flexibility.
- Durable and long-lasting finish suitable for exterior conditions.
- Water-based formula with low odour and quick drying time.
- Can be applied using various tools (brush, roller, spray).
- Self-priming nature simplifies the application process.
- Suitable for a wide range of masonry and previously painted surfaces.
Cons
- Requires thorough surface preparation for best results.
- Coverage can vary significantly based on substrate texture and porosity.
- May not be suitable for heavily damp or actively leaking walls without addressing the source of moisture first.
- Elastomeric properties are most beneficial on surfaces prone to minor movement; less critical for stable substrates.
- Specific application techniques might be needed for optimal results with spray application.
Setup, Compatibility & Care Instructions
Surface Preparation:
Ensure all surfaces are clean, dry, and free from dust, grease, and loose paint. For previously painted surfaces, abrade lightly if glossy. Any chalking or powdery surfaces should be brushed clean and treated with a suitable masonry primer or sealer. For new or bare surfaces like brickwork, render, cement, or concrete, ensure they are sound and weathered. Remove any algae, mould, or moss with a suitable cleaner and allow the surface to dry thoroughly.
Application:
Stir the paint well before use. Apply using a good quality brush, medium pile roller, or spray. Apply in thin, even coats. Two coats are generally recommended for best results. Allow adequate drying time between coats (typically 2-4 hours, depending on conditions). Avoid applying in very cold (below 10°C) or wet conditions, or when strong winds are present.
Coverage:
Approximately 9-11 square meters per litre per coat when applied by brush or roller. Coverage will vary depending on the surface texture and porosity.
Compatibility:
Suitable for exterior masonry, roughcast, pebble-dash, brickwork, cement, and concrete rendered surfaces. Can be applied to previously painted surfaces after appropriate preparation. Check compatibility with specific substrates if unsure.
Care:
Clean application tools immediately after use with water. For maintenance, clean the painted surface with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.