Farrow & Ball Skimming Stone No.241 Flat Eggshell Topcoat Paint, 2.5L Tin - Grey

Flat Eggshell is our toughest, lowest sheen finish, ideal for high-traffic areas on wood, metal, and concrete. Estate Eggshell has a slightly higher sheen and is also very durable, typically used on woodwork and furniture. Modern Emulsion is for walls and ceilings, offering a lower sheen and excellent washability but not the same toughness as eggshell for floors or high-wear surfaces.

While it is incredibly durable, Flat Eggshell is primarily designed for woodwork, doors, furniture, and surfaces like floors, radiators, and metal. For walls and ceilings, Farrow & Ball Modern Emulsion or Estate Emulsion are recommended for a more appropriate finish.

Generally, two coats are recommended for full coverage and an even finish. However, if you are painting over a dark or highly contrasting colour, or if the surface is porous, you may need three coats.

It typically dries to the touch in 2-3 hours. Re-coating time is usually around 4-6 hours, but this can vary depending on temperature and humidity. Allow the paint to cure fully for 2-3 weeks before heavy cleaning.

Skimming Stone (No. 241) is considered a warm light grey. It has subtle lilac undertones that give it a gentle warmth, distinguishing it from cooler, bluer greys.

Yes, Farrow & Ball Skimming Stone Flat Eggshell is suitable for use on metal radiators, provided the surface is properly prepared and primed if necessary.

Ensure the surface was properly primed and that sufficient coats have been applied. Allow adequate drying time between coats and stir the paint thoroughly before and during application.

Use a high-quality brush or roller designed for eggshell finishes. Apply paint in thin, even coats, maintaining a 'wet edge' to avoid overlapping dried paint. Work systematically.

Colours can vary depending on lighting conditions, surrounding colours, and surface texture. Test a small area first. Skimming Stone has warm undertones that can be influenced by light.

Ensure the paint has fully cured (allow at least two weeks) before attempting to clean. Use a soft, damp cloth with mild soap and water. Avoid harsh chemicals or abrasive scrubbing.