Metolux 2 Part SF Wood Filler - White - 275 ml

Yes, the Metolux 2 Part SF Wood Filler is weatherproof and suitable for both interior and exterior applications.

Curing times vary depending on temperature and humidity. Refer to the product packaging or technical data sheet for specific guidelines, but generally, it cures to a sandable state within a few hours.

Yes, the filler accepts all known paint systems and varnishes once fully cured, allowing for seamless finishing.

Unopened, it typically has a good shelf life when stored correctly. Once mixed, the working time is limited, and unused mixed product should be discarded.

While it provides a durable and hard-wearing repair, it is designed to be rigid once cured, similar to wood, rather than flexible.

Tools should be cleaned immediately after use with appropriate solvents. Refer to the product's safety data sheet or packaging for recommended cleaning agents.

'SF' typically stands for Styrene Free, indicating a formulation that does not contain styrene, which can have a strong odor and health considerations.

Ensure the hardener and filler were mixed in the correct proportions. Check if the hardener is old or has been exposed to air. Re-mix and apply with fresh components if necessary.

The repair area may have been too deep for a single application. Apply in thin layers, allowing each to cure partially before adding the next. Ensure the surface is properly prepared and free of dust or contaminants.

The filler may not have cured completely. Wait longer before attempting to sand. Ensure you are using appropriate grit sandpaper for the curing stage.

The wood surface might not have been clean or dry prior to application. Sand and degrease the surface before applying the filler. Remove any loose paint, varnish, or debris.