Metolux 2 Part SF Wood Filler - Black Oak

Shelf life can vary, so it's best to check the product packaging for the specific expiry date.

Yes, Metolux 2 Part SF Wood Filler is weatherproof and suitable for both interior and exterior use.

Drying time depends on temperature and humidity, but it generally dries within a few hours. Always refer to the product instructions for specific guidance.

Use fine-grit sandpaper (e.g., 180-grit or higher) for sanding the filler smooth.

Yes, for deeper imperfections, apply the filler in thin layers, allowing each layer to dry completely before applying the next.

It's generally recommended to prime the filled area before painting, especially if using a light-colored paint.

Clean tools and spills immediately with a suitable solvent.

Yes, it is compatible with most wood types. However, always test on an inconspicuous area first.

Ensure the correct ratio of filler and hardener is used. Check the expiration date of the hardener and ensure proper mixing.

The filler may have been applied too thickly. Apply in thin layers, allowing each layer to dry before adding the next. Ensure the surface is clean and prepared properly.

Allow the filler to fully cure before sanding. Use appropriate grit sandpaper.

Ensure the correct color filler is selected to match the wood. If needed, apply a stain before finishing.