This Ronseal One Coat Shed & Fence Protector Refill Pouch in Charcoal Grey offers a convenient way...This Ronseal One Coat Shed & Fence Protector Refill Pouch in Charcoal Grey offers a convenient way to top up your existing tub. The 950ml pouch mixes with water to create up to 5 litres of shed and fence protector. It provides all-weather protection against rain, frost, snow, and sun, ensuring long-lasting colour and durability for up to two years. The formula is quick-drying, becoming showerproof in just one hour, and can be applied easily with a brush or spray onto rough sawn wood. This refill pouch is also designed to be more environmentally friendly, using 90% less plastic compared to a 5L bucket.
This Ronseal One Coat Shed & Fence Protector Refill Pouch is designed for homeowners seeking an efficient way to top up their existing shed and fence treatment, offering a cost-effective solution for maintaining garden wood. It provides up to two years of robust protection against various weather conditions and delivers lasting color in Charcoal Grey. While highly convenient for refills, ensure you have an existing tub to mix the concentrate into.
All features
Colour
Grey
Model Part Number
KCB.8174503.10800.73
Brand
Ronseal
Extended Product Information
FAQs
How much area can one mixed pouch cover?
When mixed to yield up to 5 liters, the coverage can vary significantly depending on the porosity and texture of your rough sawn wood. Generally, it provides excellent coverage per coat.
Can I use this on smooth planed wood?
No, this product is specifically formulated for rough sawn wood surfaces to ensure optimal adhesion and performance.
What is the best way to apply this product?
You can apply it effectively using either a brush or a spray gun. For larger areas like fences, a spray gun can be more efficient and provide less mess. For detailing or smaller sheds, a brush works well.
How long does the protection last?
This Ronseal One Coat Shed & Fence Protector offers durable protection against all weather conditions for up to two years.
Do I need to prepare the wood before applying?
For best results, ensure the rough sawn wood surface is clean, dry, and free from any loose debris, dirt, or flaking old paint/stain before application.
Can I use less water for a stronger color?
This product is formulated to be mixed with water to create up to 5 liters for optimal performance and consistency. Deviating from the recommended dilution may affect its protective properties and application.
What if it rains shortly after application?
The product becomes showerproof in just one hour. However, it's always best to apply on a dry day with no rain forecast for at least 24 hours to allow for full curing and maximum durability.
Troubleshooting
Product appears too thick after mixing
Ensure you have added the correct amount of water (up to 5 liters total from the 950ml pouch). Stir vigorously for several minutes to ensure thorough mixing.
Uneven color after one coat
Ensure the wood surface is clean, dry, and free from loose debris before application. Apply evenly, avoiding over-spreading or pooling. For very absorbent wood, a second thin coat might be considered after the first has dried, though one coat is typically sufficient.
Product not drying within an hour
Check local weather conditions. High humidity or low temperatures can extend drying times. Ensure good ventilation. Apply in dry conditions, above 5°C.
Product peels or flakes prematurely
This product is designed for rough sawn wood. Ensure the surface was clean, dry, and free of grease or old flaky coatings. Prep the surface by cleaning and lightly sanding if necessary before application.
Pros and Cons
Pros
Cost-effective refill solution
One coat application saves time
Fast drying (1 hour showerproof)
Excellent weather protection for up to 2 years
Flexible application (brush or spray)
Cons
Requires mixing with water
Needs an existing tub for best use (implied by "top up")
Only suitable for rough sawn wood
Setup, Compatibility & Care
Setup:
Ensure you have an empty or partially used Ronseal One Coat Shed & Fence Protector tub.
Carefully open the 950ml refill pouch.
Pour the entire contents of the pouch into your clean Ronseal tub.
Gradually add water to the tub, stirring continuously, until you reach a total volume of up to 5 liters. Stir thoroughly to ensure the concentrate is fully mixed.
Once mixed, the product is ready for application.
Compatibility:
This product is specifically designed for use on rough sawn wood. It is suitable for garden sheds, fences, and other rough sawn timber structures.
Do not use on smooth planed timber or non-wood surfaces.
Care (Post-Application):
Clean brushes and spray equipment immediately after use with water.
Store any remaining mixed product in a sealed tub in a frost-free environment.
The treated wood will be showerproof in one hour. Avoid heavy rain or prolonged moisture exposure for at least 24 hours after application for optimal curing.
The product offers protection for up to two years. Reapplication is recommended after this period or when signs of wear appear to maintain protection and color.