Ft Paints Texture Paint - 1100ml - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
FabioT. FT Paints RT 2K Polyurethane Texture Paint is a high-performance topcoat for professionals seeking a durable, decorative finish on industrial machinery, tools, and steel structures. Its key benefit is a resilient, textured coating that effectively hides surface imperfections while offering robust protection against impact, UV, weather, and chemicals. A potential caveat is the need for proper application equipment and ventilation due to its 2K formulation.
All features
| Colour | White |
|---|---|
| Model Part Number | FT-PU300-P0.76L-H0.19L-T0.15L-M-VE |
| Brand | FabioT. |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is the shelf life of the mixed paint?
Once mixed with the hardener, the pot life is limited and typically ranges from a few hours at room temperature. Refer to the product's technical data sheet for exact pot life.
Can this paint be applied with a brush?
This product is primarily designed for spray application (spray gun or airless). Brush application may result in an inconsistent texture and finish.
What is the container volume of this specific kit?
This kit contains a total volume of 1.10 L, comprising 0.76 L of paint, 0.19 L of hardener, and 0.15 L of thinner.
How should I store unused paint and hardener?
Store in a cool, dry place, away from direct sunlight and sources of ignition. Ensure containers are tightly sealed. Unmixed components have a longer shelf life than mixed product.
Is this paint suitable for automotive exteriors?
While it offers excellent durability, it's specifically formulated for industrial machinery and structures. For automotive exteriors, a product designed explicitly for vehicles might be more appropriate.
What safety precautions are needed?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE) including gloves, eye protection, and a respirator suitable for organic vapors and isocyanates.
Can I recoat the surface after applying this paint?
Yes, recoating is possible. Ensure the previous coat is clean and properly prepared. Refer to the technical data sheet for recommended recoat times and procedures.
Troubleshooting
Paint not curing or curing slowly
Ensure the correct hardener ratio was used and the ambient temperature is within the recommended application range. Check that both components were thoroughly mixed.
Poor adhesion to the surface
Verify the surface was properly cleaned, degreased, and free from contaminants. Ensure a compatible primer was used if required by the substrate.
Uneven texture or finish
Check spray gun settings (pressure, nozzle size) and application technique. Ensure consistent spray patterns and correct distance from the surface. Stirring the paint thoroughly during application may also help maintain texture uniformity.
Runs or sags
Reduce the amount of paint applied per coat, increase the spray gun's distance from the surface, or reduce the viscosity by adding slightly more thinner (if within recommended limits). Avoid over-thinning.
Pros and Cons
Pros
- Provides a durable and attractive textured finish.
- Excellent resistance to impact, UV, weather, chemicals, and solvents.
- Hides surface imperfections effectively.
- Offers strong adhesion and uniform coverage.
- Suitable for a wide range of industrial applications.
Cons
- Requires specific application equipment (spray gun or airless).
- 2K formulation necessitates proper ventilation and safety precautions.
- May require thinning for optimal application, depending on method.
- Not suitable for DIY interior decorative use where VOCs are a concern.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system that requires mixing the paint, hardener, and thinner in the correct proportions as specified in the technical data sheet before application. Ensure the surface to be painted is clean, dry, and free from grease, oil, and rust. Proper ventilation is crucial during mixing and application.
Compatibility: Ideal for application on metal substrates including industrial machinery, tools, lockers, and steel structures. It is designed as a topcoat and may require a compatible primer for optimal performance depending on the substrate.
Care: To maintain the finish, clean surfaces with a mild detergent and water. Avoid abrasive cleaners or solvents that could damage the coating. For industrial environments, regular inspection for any damage or wear is recommended.