Crown Crafted Walls & Wood Poetry Luxurious Flat Matt Paint 2.5L - Green

Info needed: [Specific coverage per litre/can from product label. Typically, a 2.5L can of paint might cover approximately 25-30 square meters per coat, depending on surface porosity and application method. Always refer to the product packaging for precise coverage rates.]

For optimal depth of color and full opacity, two coats are generally recommended. For a truly flawless finish or when painting over very contrasting colors, a third coat may be beneficial.

Info needed: [Specific touch dry and recoat time from product label. As a general guide, touch dry is usually 1-2 hours, and recoat time is typically 4 hours. Always consult the product label for precise drying instructions.]

This flat matt paint is designed for interior walls and wood. While it can be used, flat matt finishes are generally less resistant to moisture and scrubbing than specialized kitchen and bathroom paints. For areas with high humidity or frequent splashes, a more durable, moisture-resistant paint is usually recommended.

For best adhesion, coverage, and a superior final finish, using a suitable primer or undercoat is highly recommended, especially on bare wood, new plaster, or when painting over significantly different existing colors. This provides a uniform base for the topcoat.

As this is a water-based paint (implied by 'Breatheasy'), clean brushes, rollers, and other tools immediately after use with warm, soapy water. Rinse thoroughly until all paint residue is removed.

Flat matt finishes are generally not designed for heavy washing or scrubbing without potentially affecting the delicate velvety appearance. For minor marks, gently spot clean with a soft, damp cloth and mild soap. Avoid abrasive cleaning to preserve the finish.

Ensure consistent application pressure and technique. Overlap wet edges to prevent lines. If the paint is drying too quickly, try working in smaller sections or ensuring room temperature is moderate. Proper surface preparation, including sanding and priming, also helps.

Verify the surface was clean, dry, and properly primed, especially when painting over a significantly darker or contrasting color. Allow the first coat to dry completely, then apply an additional coat. Stir the paint thoroughly before and during use to ensure pigment distribution.

Ensure adequate ventilation in the painted area to promote drying. Check ambient temperature and humidity; paint dries best in moderate conditions. Avoid applying excessively thick coats. Confirm the surface was completely dry before paint application.

While the Breatheasy® formula significantly reduces odor, some lingering smell can occur. Ensure continuous and thorough ventilation of the room for several days until the odor fully dissipates. Use fans to aid air circulation.