Crown Crafted Walls Suede Textured Finish Paint 2.5L - Soft Grey

This paint is designed for interior walls and ceilings. It works well on properly prepared plaster, drywall, and previously painted surfaces.

Apply with a brush or a textured roller, using short, random strokes or a cross-hatch pattern. Avoid long, even rolls. Stir the paint thoroughly before and during use to keep the texture particles evenly distributed. Two thin coats are often better than one thick coat.

Yes, for best results and uniform coverage, especially on new plaster or unpainted surfaces, it's highly recommended to apply a suitable primer first. This improves adhesion and prevents uneven absorption.

Gently wipe with a soft, damp cloth or sponge using plain water. Avoid abrasive cleaners or scrubbing, as these can damage the delicate texture. Address spills promptly.

The paint's unique formulation includes finely ground olive stones which, when applied correctly, create a subtle, naturally brushed, and tactile surface that resembles the soft feel of suede.

This paint is generally for interior walls. While it can be used, we recommend ensuring good ventilation in high-moisture areas like bathrooms and kitchens, as prolonged exposure to steam or splashes might affect its longevity compared to paints specifically formulated for high-humidity environments. Check product data sheet for specific moisture resistance.

The coverage depends on the surface porosity and application method. Typically, a 2.5L tin covers approximately [Info needed: insert actual coverage per 2.5L tin] square meters per coat. Always calculate your wall area and consider two coats for textured finishes.

This often occurs if the paint wasn't stirred thoroughly or applied inconsistently. Ensure you stir the paint well before and during application. For existing unevenness, a light, very fine sanding of high spots (if possible without damaging the texture) followed by a thin, carefully applied coat over the area may help. Practice on a small, inconspicuous area first.

This could be due to an unprimed surface absorbing too much paint or insufficient application. Ensure your walls are properly primed. Apply a second, thin coat, making sure to maintain consistent application technique for the texture. Avoid overspreading the paint too thinly.

This usually indicates poor surface preparation. Ensure the wall is clean, dry, and free from loose paint or dust before applying. Sand down any flaking areas, clean thoroughly, prime, and then reapply the textured paint.

The suede effect is achieved through specific application. Ensure you are using a brush or textured roller and applying in short, random, or cross-hatch strokes rather than long, even rolls. Avoid overloading your tool with too much paint, which can flatten the texture. Two thin coats are often better than one thick one.