Ft Paints Floor Paint Kit - Semi Gloss - 1.10L - Traffic Grey A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. FT Paints 2K Epoxy Floor Paint is a high-performance, solvent-free coating designed for industrial floors, workshops, and garages that experience heavy use and chemical exposure. Its key benefit is providing a durable, semi-gloss, self-levelling finish with excellent resistance to abrasion, chemicals, and oil. A potential consideration is the 7-day full cure time required for optimal performance.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-EP275-P0.92L-H0.18L-G-GR |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the coverage rate of the 1.10 L kit?
Coverage varies depending on the substrate porosity and application thickness. Refer to the product's technical data sheet for specific coverage rates, but generally, a 1.10 L kit covers approximately X square meters at Y thickness.
Can this paint be used on exterior concrete surfaces?
While designed for demanding interior industrial use, its resistance to chemicals and weather elements like frost and de-icing salts suggests potential for exterior applications. However, always test in an inconspicuous area first, as UV stability may vary.
How long does the mixed paint remain workable?
The pot life (workable time) of the mixed 2K epoxy is typically around 30-60 minutes at 20°C. This time is reduced at higher temperatures. Only mix what you can apply within this timeframe.
Is this product suitable for residential garage floors?
Yes, its durability, chemical resistance, and easy-to-clean finish make it an excellent choice for residential garage floors that experience vehicle traffic and potential spills.
Can I apply a second coat if needed?
Yes, a second coat can be applied, typically within the recoat window (usually 12-24 hours) after the first coat has become touch-dry but not fully cured. Check the technical data sheet for specific recoat times.
What is the main difference between 1K and 2K epoxy paints?
1K epoxy paints are single-component and air-cured, generally offering less durability. 2K epoxy paints, like this one, are two-component systems that chemically react when mixed, resulting in a much harder, more durable, and chemically resistant finish.
Can I apply this paint over existing coatings?
It is best applied directly to properly prepared concrete. If applying over existing coatings, ensure they are sound, well-adhered, and can be thoroughly cleaned and abraded to provide a suitable surface for the new epoxy to bond to. A test patch is highly recommended.
Troubleshooting
Uneven finish or brush marks visible
Ensure proper mixing of components. Apply evenly with consistent pressure using the recommended application tool (roller, trowel). Work in smaller sections if necessary, maintaining a wet edge.
Coating not hardening or curing slowly
Verify that the correct mixing ratio of paint and hardener was used. Ensure the application temperature is within the recommended range (typically 10-30°C) and humidity is not excessively high.
Poor adhesion to the substrate
Re-evaluate surface preparation. The concrete must be clean, dry, and free of contaminants. Consider using a compatible primer if the substrate is porous or problematic.
Bubbles or pinholes in the finish
This can be caused by trapped air or moisture in the substrate. Ensure the concrete is fully dry before application. Applying in direct sunlight or at high temperatures can also cause premature skinning, trapping air. Apply during cooler parts of the day.
Pros and Cons
Pros
- Exceptional durability for heavy-duty applications.
- Resistant to a wide range of chemicals and oils.
- Provides a smooth, aesthetically pleasing finish.
- Fast return to service after application.
- Solvent-free formulation for safer application.
Cons
- Requires a 7-day full curing period for maximum performance.
- Mixing and application require careful attention to detail.
- Not suitable for extreme temperatures above 130°C for extended periods.
Setup, Compatibility & Care
Preparation: Ensure the concrete substrate is clean, dry, and free from dust, grease, and previous coatings. Proper surface preparation is critical for optimal adhesion. For best results, consider using Mipa primers.
Mixing: This product is a 2K (two-component) system. Carefully mix the paint (0.92 L) with the hardener (0.18 L) in the provided kit according to the manufacturer's instructions. Ensure thorough mixing to activate the chemical curing process.
Application: Apply the mixed product using a roller, trowel, or notched trowel. For anti-slip finishes, incorporate compatible quartz additives during application as per their specific instructions.
Curing: The floor will be walkable after 24 hours. Full chemical and mechanical resistance is achieved after 7 days of curing.
Compatibility: Compatible with Mipa primers and quartz additives for anti-slip finishes. Always test compatibility with other products before full application.
Care: Clean the floor with mild detergents and water. Avoid abrasive cleaners or harsh chemicals that could degrade the coating. Regular cleaning will maintain the finish and extend its lifespan.