Ft Paints 100Ml Sample Floor Semi Gloss Paint - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Epoxy Floor Paint (100 ml Sample, White) is a high-performance, solvent-free coating designed for industrial floors, workshops, warehouses, and storage areas. Its key benefit is providing a durable, self-levelling, semi-gloss finish that withstands heavy mechanical loads and chemical exposure. A potential caveat is that the sample size is intended for testing or small areas, not full floor coverage.
All features
| Colour | White |
|---|---|
| Model Part Number | FT-EP275-100SAM-G-IP |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the best use for this 100 ml sample size?
The 100 ml sample size is ideal for testing adhesion and appearance on a small area, for color matching, or for very small projects like a single workbench or a small patch repair.
Is this product suitable for outdoor use?
While it offers resistance to elements like frost and de-icing salts, it is primarily engineered for industrial and workshop environments. Check manufacturer recommendations for specific outdoor exposure suitability.
How do I clean the painted floor?
Regular cleaning can be done with a damp mop and a mild, pH-neutral detergent. Avoid using harsh chemicals or abrasive scrubbing pads, which could damage the finish.
Can I apply this over an existing coating?
It's generally recommended to apply over bare, properly prepared concrete. If applying over an existing coating, ensure it is well-adhered, clean, and abraded. Compatibility testing is advised.
What is the shelf life of the product?
Refer to the product packaging or manufacturer's datasheet for specific shelf life information. Proper storage in a cool, dry place is essential.
Does the semi-gloss finish hide imperfections well?
The self-levelling properties help create a smooth surface, and the semi-gloss finish provides a clean look. However, significant substrate imperfections may still be visible.
Can I mix this with other brands of epoxy?
It is not recommended to mix this product with other brands or types of coatings, as this can lead to unpredictable results and compromise performance.
Troubleshooting
Paint is not adhering well to the surface.
Ensure the concrete substrate was properly prepared, clean, and dry before application. Check if the correct primer was used, if necessary.
Uneven finish or streaks.
Verify that the two components were mixed thoroughly and accurately according to the instructions. Apply paint evenly, avoiding overworking areas.
Coating remains tacky after 24 hours.
Check the mixing ratio and ensure components were fully combined. Extreme temperatures or humidity during application or curing can also affect drying times.
Bubbles or pinholes in the finish.
This can be caused by trapped air or moisture in the substrate. Ensure the surface is completely dry and free of contaminants. Apply in thin, even coats.
Pros and Cons
Pros
- High durability for industrial use.
- Excellent resistance to chemicals and abrasion.
- Fast project turnaround due to quick curing.
- Versatile application methods.
- Solvent-free formula for safer application.
Cons
- Sample size (100 ml) is not suitable for large areas.
- Requires proper surface preparation for optimal adhesion.
- Two-component (2K) system requires accurate mixing.
- May require specific primers for certain substrates.
Setup, Compatibility & Care
Preparation: Ensure the concrete substrate is clean, dry, and free from dust, grease, and previous coatings. Surface profiling may be required for optimal adhesion.
Mixing: This is a 2K (two-component) system. Carefully follow the manufacturer's instructions for the correct mixing ratio of the base and hardener. Mix thoroughly to ensure a uniform consistency.
Application: Apply using a roller, trowel, or notched trowel. Ensure even coverage. For anti-slip finishes, incorporate quartz additives into the wet coating. Compatible with Mipa primers.
Curing: The floor will be walkable in approximately 24 hours, with a full cure achieved within 7 days. Avoid heavy traffic and chemical exposure during the curing period.
Care: Clean spills immediately. For regular cleaning, use a damp mop and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the coating.