FabioT. Floor Paint - 100Ml Sample - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Epoxy Floor Paint is a high-performance, solvent-free coating designed for industrial and demanding floor environments. It offers a durable, semi-gloss, self-levelling finish with excellent resistance to abrasion, chemicals, and heat, making it ideal for workshops, warehouses, and garages. While it provides robust protection and a fast return to service, users should ensure proper surface preparation for optimal adhesion.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-EP275-100SAM-G-CF |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the coverage rate of this product?
Coverage varies depending on the application method and substrate porosity. Refer to the product's technical data sheet for specific coverage rates.
Can this paint be used on existing painted or coated floors?
It is generally recommended to apply to bare, prepared concrete. Existing coatings may need to be removed or tested for compatibility. Consult the technical data sheet.
How long does the mixed product remain workable?
The pot life of the mixed product is limited. Refer to the technical data sheet for the specific working time at the recommended application temperatures.
Is this product suitable for outdoor use?
This product is primarily designed for indoor industrial environments. Its suitability for outdoor use may depend on exposure to UV light and weather conditions. Consult the manufacturer for specific outdoor applications.
What are the ideal application temperature and humidity ranges?
Optimal application conditions are typically between 10°C and 25°C with relative humidity below 75%. Always check the technical data sheet for precise recommendations.
Can I apply a second coat?
Yes, a second coat can be applied within the recoating window specified in the technical data sheet to achieve enhanced durability and finish.
Is the 100ml sample size enough to test the color?
The 100ml sample size is intended for color and adhesion testing on a small area. It is not sufficient for coating a significant floor area.
Troubleshooting
Uneven or streaky finish
Ensure thorough mixing of components and consistent application technique. Check that the surface is properly prepared and level.
Poor adhesion or peeling
Verify that the concrete surface was adequately prepared (clean, dry, free of contaminants) and that a compatible primer was used if recommended.
Bubbles or pinholes in the coating
This can be caused by moisture in the substrate or trapped air. Ensure the concrete is completely dry and apply the coating in thin, even coats. Avoid over-rolling.
Slow curing time
Ensure the correct mixing ratio of components is used and that the ambient temperature and humidity are within the recommended application range.
Pros and Cons
Pros
- High durability for industrial environments.
- Resistant to chemicals, oils, and abrasion.
- Fast curing time allows for quick project completion.
- Solvent-free formula is safer to use.
- Provides a smooth, professional-looking finish.
- Good adhesion to concrete substrates.
Cons
- Requires thorough surface preparation for best results.
- Sample sizes may not be sufficient for large areas.
- May require specific primers for optimal performance.
- Not designed for extreme, continuous high temperatures.
- Application requires specific tools and techniques.
Setup, Compatibility & Care Instructions
Surface Preparation:
- Ensure the concrete substrate is clean, dry, and free from dust, grease, oil, and existing coatings.
- Repair any cracks or imperfections using appropriate concrete repair compounds.
- Abrasive blasting or grinding is recommended for optimal adhesion.
- For best results, prime the surface with a compatible Mipa primer.
Application:
- Mix the two components of the epoxy thoroughly according to the manufacturer's instructions.
- Apply the mixed coating using a roller, trowel, or notched trowel.
- For anti-slip finishes, incorporate quartz additives during application.
- Ensure adequate ventilation during application and curing.
Compatibility:
- Compatible with Mipa primers.
- Can be used with quartz additives for enhanced slip resistance.
Care:
- Clean spills immediately.
- Routine cleaning can be done with water and a mild detergent.
- Avoid abrasive cleaning tools that could scratch the surface.