Farrow & Ball Estate Walls and Ceilings Paint - Skimming Stone

Estate Emulsion has a chalkier, more traditional matte finish, ideal for low-traffic areas. Modern Emulsion is a more durable, washable finish suitable for higher-traffic areas and kitchens/bathrooms.

Estate Emulsion is not recommended for bathrooms due to its lower washability and resistance to moisture. Farrow & Ball Modern Emulsion or Estate Eggshell would be more suitable for bathrooms.

A 2.5L tin of Farrow & Ball Estate Emulsion typically covers approximately 25 square meters (270 square feet) per coat, depending on the surface texture and absorbency.

Estate Emulsion is typically touch dry within 2-3 hours and ready for a second coat after 4 hours, though this can vary with humidity and temperature.

Skimming Stone is often described as a warm grey, with subtle beige undertones that prevent it from feeling cold.

For light marks, use a soft cloth dampened with water. Avoid harsh detergents or scrubbing, as this can damage the delicate matte finish.

Yes, but the surface must be thoroughly prepared. Ensure the oil-based paint is sound, clean, and lightly sanded. Apply a suitable Farrow & Ball primer designed for such surfaces before applying the Estate Emulsion.

Ensure the paint is thoroughly stirred and applied evenly. Check for adequate lighting during application. Apply a second coat if necessary, ensuring the first coat is dry.

Use a high-quality brush and maintain a consistent direction of brush strokes. Avoid over-brushing. Ensure the paint is not too thin or too thick; thin with minimal water if absolutely necessary.

Verify the surface was properly prepared (clean, dry, dust-free). Ensure the correct Farrow & Ball primer was used for the surface type and previous finish.

Colour appearance can vary significantly with light. Test a small area or use Farrow & Ball's colour swatches to see how 'Skimming Stone' looks in your specific lighting conditions before committing to the entire room.