Dulux Weathershield Multi-Surface Paint - Pure Brilliant White - 750ml

This paint is designed for exterior wood, metal, and uPVC surfaces. Examples include doors, window frames, garden gates, and uPVC fascias.

It is touch dry in 1 hour. You should wait 4-6 hours before applying a second coat.

A 750ml tin will cover approximately 7.5m² (based on 10m² per litre coverage).

For most sound, prepared surfaces, a primer may not be necessary as it has good adhesion properties. However, for bare, very porous wood or previously unpainted metal, an appropriate exterior primer can enhance durability and finish.

Yes, it contains a weatherproof paint film that is mould resistant to minimize staining and keep your paintwork looking cleaner for longer.

No, this paint is specifically formulated for exterior use and its protective properties are designed for outdoor conditions.

Clean all painting tools immediately after use with warm soapy water.

Ensure conditions are not too cold or humid; low temperatures or high humidity can significantly extend drying times. Also, avoid applying coats too thickly, as this will also prolong drying.

Thoroughly stir the paint before and during use. Ensure the surface was properly prepared, clean, and not overly absorbent. A second coat is usually recommended for optimal opacity and durability.

This is often due to inadequate surface preparation. Ensure surfaces are clean, dry, and free of loose or chalky paint. Sanding glossy surfaces to create a 'key' is crucial for adhesion. Apply a suitable primer if the surface is particularly challenging.

While the paint is mould resistant, severe mould issues might require more intensive cleaning or treatment of the underlying surface before painting. Ensure proper ventilation and address any persistent dampness issues in the area.