Resincoat Outdoor Patio Paint - Grey

No, this is a single-part solution and does not require a separate primer or activator.

Drying times can vary based on temperature and humidity, but typically it is touch-dry within 1-2 hours and ready for a second coat or light foot traffic after 24 hours.

This product is specifically formulated for horizontal patio surfaces like slabs and concrete. It is not designed for vertical wall application.

Yes, the non-toxic acrylic resin formula is safe for pets and wildlife once fully cured.

Generally, two coats are recommended for best results and durability. However, the number of coats may vary depending on the porosity and condition of the surface.

Yes, the patio can be jet washed for cleaning. It is recommended to use a moderate pressure and keep a safe distance to avoid damaging the coating.

This paint is suitable for patio slabs, concrete, and paving stones.

Ensure the surface was thoroughly cleaned and completely dry before application. Check for any contaminants like oil or grease. Reapply after proper surface preparation.

Apply paint in thin, even coats. Avoid overworking the paint. Use a good quality roller or brush suitable for exterior coatings. Allow sufficient drying time between coats.

This is often due to inadequate surface preparation or application in unsuitable weather conditions (too cold, damp). Ensure the surface was porous and clean, and applied at the correct temperature.

The final colour can appear different when wet versus dry, and may vary slightly depending on the underlying surface colour and porosity. Allow the paint to dry completely to see the true colour.