Toupret Rough Surface Ready Mixed Finishing Plaster - 20000G Tub - White

Drying time depends on the thickness of the application and environmental conditions. Generally, allow 24-48 hours for complete drying before sanding or painting.

This plaster is primarily designed for interior use. Using it outdoors may lead to issues with weather resistance.

You'll need a filling knife or trowel for application, sandpaper for smoothing, and a container for mixing if necessary.

Store the remaining plaster in an airtight container in a cool, dry place to prevent it from drying out.

Yes, but it's important to ensure the existing paint is sound and well-adhered. Lightly sand the surface to improve adhesion.

Apply as many coats as needed to achieve a smooth and even surface. Thin coats are preferable to thick coats.

Coverage varies based on surface conditions and application thickness. Consult the product packaging for specific coverage details.

Ensure the application is not too thick. Apply thin layers and allow each layer to dry completely before applying the next. Also, ensure the surface is properly prepared and free from dust and loose particles.

Make sure the surface is clean, dry, and free from any contaminants. Consider using a primer if the surface is particularly smooth or non-porous.

If the plaster feels too thick, slightly moisten it with water and mix thoroughly. Do not add too much water.

Use fine-grit sandpaper and sand gently. Consider using a sanding block for a more even finish. Wear a dust mask for protection.