Resincoat Outdoor Patio Coating - White - Matte Finish
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Resincoat Outdoor Patio Coating in White (Matte Finish) is designed for homeowners looking to refresh and protect their patio slabs, concrete, or paving stones. Its key benefit is a ready-to-use formula that provides a smooth, even coat, offering excellent stain and weather resistance for daily use and easy maintenance. A potential caveat to consider is that it's a single-part solution, meaning it doesn't require an activator, which simplifies application but might imply different performance characteristics compared to two-part systems.
All features
| Colour | White |
|---|---|
| Brand | Resincoat |
Extended Product Information
FAQs
Do I need a primer before applying?
No, the Resincoat Outdoor Patio Coating is a single-part solution and does not require a separate primer.
How long does it take to dry?
The coating is typically touch-dry within 1-2 hours and can be recoated after 2-4 hours, depending on weather conditions.
Can I use this on wooden decking?
This product is designed for patio slabs, concrete, and paving stones. It is not recommended for use on wooden decking.
Is the white finish prone to showing dirt easily?
While white can show marks, this coating is designed to be stain-resistant and jet washable, making it easier to maintain than standard paint.
How many square meters does one container cover?
Coverage can vary depending on the porosity and texture of the surface, but typically one coat provides coverage of approximately 5-8 square meters per liter. Please refer to the product packaging for exact coverage details.
Is this product safe for children to play on after it has dried?
Yes, the formula is non-toxic and safe for pets and wildlife, making it suitable for areas where children play once fully dried and cured.
Troubleshooting
Coating peeling or flaking
This often occurs if the surface was not properly prepared (damp, dirty, or oily) or applied in unsuitable weather conditions. Ensure the surface is thoroughly clean and dry before applying in appropriate temperatures.
Uneven finish after application
Ensure consistent application technique with the brush or roller. Avoid overworking the product in one area. Apply a second, even coat if necessary after the first has dried.
Product not drying properly
Check the ambient temperature and humidity. Ensure application occurred within the recommended temperature range (10-25°C) and avoid applying in very damp or cold conditions.
Pros and Cons
Pros
- Convenient ready-to-use, single-part application.
- Provides excellent protection against stains and weathering.
- Easy to clean with high-pressure washing.
- Non-toxic formula ensures safety for pets and wildlife.
- Suitable for various outdoor hard surfaces like patios and concrete.
Cons
- Requires preparation of the surface before application.
- Matte finish may show imperfections on uneven surfaces.
- Durability may vary depending on foot traffic and environmental exposure.
- Only available in a white color family (though other colors exist in the product line).
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and free from loose debris, moss, or algae before application. For best results, apply in temperatures between 10°C and 25°C. Use a brush or roller for application, applying a smooth, even coat. A second coat may be applied after 2-4 hours if desired.
Compatibility: Suitable for use on patio slabs, concrete, and paving stones. Not recommended for use on asphalt, tarmac, or existing painted surfaces unless specifically prepared.
Care: Clean spills immediately. For general maintenance, the coating is jet washable. Avoid using abrasive cleaners that could damage the finish.