Best current price£17.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.95Visit shop B&Q - All-In-One Paint & PrimerMulti-Surface For WallsWoodInterior & ExteriorTerracotta Tiles0.5LMatt
Visit shop
Debenhams£17.95Visit shop Evelyn Grant Unisex Terracotta Tiles All-In-One Multi Surface Indoor & Outdoor Paint - 0.5L - Matt In | Size: 500Ml
Visit shop20 offers from £17.95 - £59.95
View price history by clicking the chart icon.
This Evelyn Grant All-In-One Paint & Primer is for homeowners and DIY enthusiasts seeking a versatile, professional-finish paint solution for both interior and exterior projects. Its key benefit is providing a durable, long-lasting finish with primer and paint combined, saving time and effort. A caveat to consider is the need for proper surface preparation, as with any paint, to ensure optimal adhesion and finish.
| Colour | Brown |
|---|---|
| Model Part Number | 5056291351630 |
| Brand | EVELYN GRANT |
This paint is designed for walls, wood, and masonry. For radiators, it's recommended to use a paint specifically formulated for high-heat surfaces to ensure durability and prevent discolouration.
Drying times can vary based on temperature and humidity. Typically, allow at least 2-4 hours between coats for optimal adhesion and finish.
Clean up spills and wash brushes or rollers immediately after use with water. Dried paint can be more difficult to remove and may require scraping or specialized cleaners.
No, this paint is not designed for use on floors, especially those subject to heavy foot traffic. It is intended for walls, ceilings, furniture, and exterior surfaces that do not experience constant wear.
It is not recommended to mix different colours or finishes of this paint, as it can compromise the paint's performance and the final aesthetic quality.
Coverage varies depending on the surface porosity and application method. As a general guide, expect approximately 10-12 square meters per litre per coat.
No, the product is an 'All-in-One Paint & Primer', meaning it is formulated to provide both primer and paint coverage in a single application, though a mist coat may be beneficial on very porous surfaces.
Ensure the paint is stirred thoroughly. If still thick, a very small amount of water (e.g., 5% or less) can be added, but avoid over-thinning as it can affect performance and finish.
Apply in thin, even coats, maintaining a wet edge to avoid lap marks. Use a high-quality brush or roller appropriate for water-based paints. Ensure consistent application pressure.
The surface may not have been adequately prepared. Ensure it is clean, dry, and free from grease or dust. Glossy surfaces should be lightly sanded. For very porous surfaces, a mist coat might be necessary.
While the paint has mould resistance, severe ventilation issues or constant high humidity may still lead to some growth over time. Ensure adequate ventilation in the room. Clean any visible mould with a suitable cleaner before repainting.
Preparation: For optimal results, ensure surfaces are clean, dry, and free from dust, grease, and loose material. Lightly sand glossy surfaces to improve adhesion. For new or porous surfaces, a single mist coat may be beneficial. Always test on an inconspicuous area first.
Application: Stir the paint thoroughly before use. Apply using a brush, roller, or sprayer. For best results, apply two coats, allowing adequate drying time between each. Avoid applying in extreme temperatures or high humidity.
Compatibility: Suitable for interior and exterior walls, ceilings, wood, metal (properly primed), masonry, render, brick, stone, and concrete. Not recommended for floors subject to heavy foot traffic or surfaces in constant contact with water.
Care: Clean brushes and equipment immediately after use with water. Wipe painted surfaces gently with a damp, soft cloth. Avoid abrasive cleaners or harsh scrubbing to maintain the finish. For stubborn marks, use a mild detergent solution and rinse with clean water.
